STOP Screen

time date

KeyLock unlocked

pump timer cartridge low

battery low

The STOP screen shows the current time and date, the STOP symbol, reminder information (such as “battery low”), and special functions (such as KeyLock locked or unlocked). Some functions must be programmed while your pump is in STOP mode, when insulin is not being delivered. Your pump must also be in STOP mode before you can change cartridges. Additionally, always disconnect your pump from the infusion site and place the pump in STOP mode when you prime the infusion set and/or when you transfer data. See the section “Stopping Insulin Delivery” (page 66) for instructions on stopping your pump.

QUICK INFO Screen

If you press the f key from the RUN or STOP screen, your pump displays the remaining cartridge content in units. Symbols for activated functions and

features (like the beep and vibration alarm signals) are displayed. Your pump will return to the RUN or STOP screen after 8 seconds.

Information, Function, and Setup Screens

You will need to access various screens so you can view stored information, program the pump, perform a function, or change a setting. You can reach these screens from either the RUN or STOP screen.

Chapter 1: Understanding Your New System

14

ACCU-CHEK Spirit Insulin Pump

Page 15
Image 15
Accu-Chek insulin pump manual Stop Screen, Quick Info Screen, Information, Function, and Setup Screens