AltiGen comm 600 Plug and Play Setup Before IP Phone is Started, Plug and Play Setup After IP Phone is Started

Alti-IP 600 Manual 14
• Gatekeeper auto discovery uses broadcast UDP packets which work in
theLAN or VPN environment, but not through the public IP network.
Plug and Play Setup Before IP Phone is Started
Toset up your IP Phone to properly execute the Plug and Play feature,
performth efollo wings tepsBEFO RE YOUSTAR T THEP HONE:
1. Ensurethe AltiGen GateKeeper is running and configured to point to
theA ltiWare system.
2. EnsureDHCP server is up and running.
3. Ensurethat there are enough IP addresses.
4. Ensurethat there is an available virtual extension with the IP extension
featureenabled and dynamic IP address is selected.
5. Powerup the IP Phone.
6. Enterthe extension number and password.
7. Thephone will attempt to register as shown in the LCD screen.
Ifthe phone successfully passes through these stages,the phone shows
thetime and extension in the LCD s creen and is now in normal
operatingmode.
Otherwise,refer to “Troubleshooting” on page 37.
8. Ifyou wish to change soft keys, you can set up IP Phon e properties in
AltiWare as described in Step 2 - “AltiAdmin/ACM Admin Setup -
AltiGen IP Phone Configuration Window” on page 7.
Plug and Play Setup After IP Phone is Started
Ifyou have already started your phone, and wish to execute the Plug and
Play feature, perform the following steps: