AltiGen comm 600 Modifying DHCP Settings

Alti-IP 600 Manual 23

Modifying DHCP Settings

DynamicHost Configuration Protocol (DHCP) automaticallyassigns IP

addressesto devices when they are connected to the network.

Enabling DHCP

TheAlti-IP 600 automatically enables DHCP by default, but you can reset

thep rotocol if it becomes disabled using the following steps:

1. Press **7+ENTER button.

2. Use !/"to select Network,thenpresstheEnter key.

3. Scroll to Enable DHCP.

IfDHC P is disabled, the option displays as DHCP Enabled NO.

4. Press "(DOWN key) to enable DHCP.

Disabling DHCP

Ifyou do not use DHCP in your network, you can disable DHCP before

manuallyassigning an IP address to the Alti-IP 600. To disable DHCP, use

thef ollowing steps:.

Note: Proceduresinvolving configuring IP settings cannot be completed

whenDHCP is enabled in your network.

1. Press **7+ENTER button.

2. Use !/"to select Network,thenpresstheEnter key.

3. Scroll to Enable DHCP.

IfDHCP is enabled, the option displays as DHCP Enabled YES.

GateKeeper

Discovery Network>GK

Discovery Setto YES or NO to indicate whether

GateKeeperdiscovery is enabled.IP

Phonewill automatically find

GateKeeper.

EnableNAT Network>Enable/

Disable NAT Setwheth er NAT is enabled or

disabled.

NATAddress Network>NAT

Address Setsthe NAT server’s pu blic IP

address.

Contents

Main WARNING! NOTICE TRADEMARKS Contents CHAPTER 4 ConfiguringPhoneSettings..........................21 Page Page Warranty vi Alti-IP600 Manual Effect of State Law Sales Outside the U.S.A. Preface: About This Manual Overview Page An Overview of the Alti-IP 600 Alti-IP 600 Manual 2 Alti-IP600 Manual 3 Hardware Components New in Version Level 12.0.0 System & Network Requirements System Requirements Note: Network Requirements Important: AltiGen IP Phone Service Plug and Play Feature Basic Mode Normal Operation Installation Manual Setup Page Alti-IP600 Manual 9 Parameter Description Alti-IP 600 Manual 10 Parameter Description Apply To Button Copy From Button Important: Notes: To connect the Alti-IP 600H/600PH: Plug and Play Setup Important Notes: Plug and Play Setup Before IP Phone is Started Plug and Play Setup After IP Phone is Started Remote Installation Page Verifying the Phone Startup Process Resolving Errors Upon Startup Active Logon While Another Handset is Already Logged On To the Same Extension Page Operation Notes Page Configuring Phone Settings Important: System Settings Network Settings Alti-IP 600 Manual 22 Modifying DHCP Settings Enabling DHCP Disabling DHCP Configuring IP Settings Assigning a Local IP Address Assigning a TFTP Server Updating Phone Firmware Important: Resolving Errors Upon Startup Configuring NAT Assigning NAT Setting Ring Tones Distinctive Ringing Support Workgroup Status Display Activity Display Page Alti-IP 600 Manual 31 HAPTER Phone Functions Alti-IP 600 Manual 32 Alti-IP 600 Manual 33 Alti-IP 600 Manual 34 Appendix A Specifications FirewallConsiderations 36 Alti-IP 600 Manual Firewall Considerations Ifu sing a firewall in the AltiWare environment, the following network portsare used: Troubleshooting Page LCD Messages Local Menu Configuration Messages Alti-IP 600H/600PH Running Messages LCDMessages 40 Alti-IP 600 Manual Alti-IP 600 Manual 41 IP Phone Boot Messages The following messages may be displayed in the LCD when booting the Alti-IP 600H/600PH: User Reference Basic Phone Operation UserReference 42 Alti-IP 600 Manual Alti-IP 600 Manual 43 Whileon a call with Speaker on Phoneis onhook Fora connected c all: * * Feature Codes AltiServ Feature Codes Phoneis onhook Alti-IP 600 Manual 45 Page Glossary A B D Page K L M N O P Q R S T MailSystem U V W Page Index A B C D I K L M N