Alti-IP 600 Manual 24
4. Press"(DOWN key) to disable DHCP.
Configuring IP Settings
Use these guidelines when manually configuring the IP settings:
• Ensure the default gateway IP address in on the same subnet as the host
IPaddress.
• When inputting IP addresses into the A lti-IP 600, use the *keytoenter
periods.For example, “209.120.12.8” would be inputted as
“209*120*12*8”.

Assigning a Local IP Address

TheIP address is the unique logical address identifying each host computer
ona TCP/IP network. An IP address is a 32-bit number expresses as four
decimalnumbers from 0 to 255 separated by periods.
Toassign an IP address, use the following steps:
1. Press**7+ENTER button.
2. Use!/"to select Network,thenpresstheENTERbutton.
3. Scrollto Local Address.
4. Pressthe ENTER button or#(FORWARD key).
5. Usethe buttons on the dial pad to enter a new IP address, using the *
keyto enter periods. Use the $(BACK key) to correct any mistakes.
6. Pressthe ENTER button.

Assigning a TFTP Server

Thedefault TFTP Server is set to 0.0.0.0.
Toassign the TFTP server, use the following steps:
1. Press**7.
2. Use!/"to select System,thenpresstheENTERbutton.
3. Scrollto TFTP Server.
4. PressENTER button or#(FORWARD key).