AltiGen comm 600 Operation Notes

Alti-IP 600 Manual 19

• Ifth eAlti- IP 600 isconfig ured for apubli cIP address, you can call

otherpublic IP address devices.

Ifthe Alti- IP 600 is configured for a private IP address, you can call other

privateIP address devices that you can “see” or that are on your subnet.

Operation Notes

• TheAlti-IP 600 do esno tw ork with TAPI as the source phone (caller).

• Whenusing #26 and #27 to lo g out/in, the Alti-IP 600 must be onhook.

Usingthe speaker button to use #26 or #27 will not work.

• Twodial tones are always heard when going offhook on the Alti-IP

600.

• If two callsr ing into the Alti-IP 600 at the same time and the user

attempts to answer the second call, the IP phone will automatically

connectthe user to the first call.

• The user should rebootth e Alti-IP 600 afterdisco nnecting theLAN

cableto the phone.

• Theuser should reboot the Alti-IP 600 after changing the IP address or

DHCP setting.

• Ifth eAlti- IP 600 isconfig ured for apubli cIP address, you can call

otherpublic IP address devices.

• Ifth eAlti- IP6 00is configured for a private IP address, you can call

otherprivate IP address devices that you can “see” or that are on your

subnet.

• The daisy chaining of Alti-IP 600 phones is not supported.

Contents

Main WARNING! NOTICE TRADEMARKS Contents CHAPTER 4 ConfiguringPhoneSettings..........................21 Page Page Warranty vi Alti-IP600 Manual Effect of State Law Sales Outside the U.S.A. Preface: About This Manual Overview Page An Overview of the Alti-IP 600 Alti-IP 600 Manual 2 Alti-IP600 Manual 3 Hardware Components New in Version Level 12.0.0 System & Network Requirements System Requirements Note: Network Requirements Important: AltiGen IP Phone Service Plug and Play Feature Basic Mode Normal Operation Installation Manual Setup Page Alti-IP600 Manual 9 Parameter Description Alti-IP 600 Manual 10 Parameter Description Apply To Button Copy From Button Important: Notes: To connect the Alti-IP 600H/600PH: Plug and Play Setup Important Notes: Plug and Play Setup Before IP Phone is Started Plug and Play Setup After IP Phone is Started Remote Installation Page Verifying the Phone Startup Process Resolving Errors Upon Startup Active Logon While Another Handset is Already Logged On To the Same Extension Page Operation Notes Page Configuring Phone Settings Important: System Settings Network Settings Alti-IP 600 Manual 22 Modifying DHCP Settings Enabling DHCP Disabling DHCP Configuring IP Settings Assigning a Local IP Address Assigning a TFTP Server Updating Phone Firmware Important: Resolving Errors Upon Startup Configuring NAT Assigning NAT Setting Ring Tones Distinctive Ringing Support Workgroup Status Display Activity Display Page Alti-IP 600 Manual 31 HAPTER Phone Functions Alti-IP 600 Manual 32 Alti-IP 600 Manual 33 Alti-IP 600 Manual 34 Appendix A Specifications FirewallConsiderations 36 Alti-IP 600 Manual Firewall Considerations Ifu sing a firewall in the AltiWare environment, the following network portsare used: Troubleshooting Page LCD Messages Local Menu Configuration Messages Alti-IP 600H/600PH Running Messages LCDMessages 40 Alti-IP 600 Manual Alti-IP 600 Manual 41 IP Phone Boot Messages The following messages may be displayed in the LCD when booting the Alti-IP 600H/600PH: User Reference Basic Phone Operation UserReference 42 Alti-IP 600 Manual Alti-IP 600 Manual 43 Whileon a call with Speaker on Phoneis onhook Fora connected c all: * * Feature Codes AltiServ Feature Codes Phoneis onhook Alti-IP 600 Manual 45 Page Glossary A B D Page K L M N O P Q R S T MailSystem U V W Page Index A B C D I K L M N