AltiGen comm 600 Configuring Phone Settings

Alti-IP 600 Manual 21

C

HAPTER

4

Configuring Phone Settings

Aset ofphone relatedpar ameters — system settings and network settings

—can be configuredthrough the IP phone’s setup menu by pressing “**

7,” then the ENTER button.

!/"(UP/DOWN keys) selects YES or NO in the LCD display.

#(FORWARD key) selects menu.

$(BACKk ey) returnsto previousmenu.

Thefollowing tables describe each setting and corresponding the menu

path.

Important:Please note that the configuration in AltiAdmin will override

theAlti-IP 600 phone’s local configuration after the IP Phone

isregistered. If the IP Phone’s local configuration is changed

while in Basic mode, these changes will be overwritten by

AltiAdmin settings. Also, after the IP Phoneis successfully

registered with AltiServ, the IP Phone will overwrite the

AltiWareIP address and network-related settings on the server.

Note: Severalof these settings can be configured through AltiAdmin by

theS ystem Administrator.

System Settings

Setting MenuPath {Sub Menu} Description

Extension

Number System>Ext Number

{SetIP Extension

Number}

Setsthe IPphone’s ext ension

number

Extension

Password System>Ext

Password{Set IP

ExtensionPassword}

Setsthe IPphone’s ext ension

password

AltiWare

Server System>AW Server

{AltiWareIP Address} Sets the Alt iWare server’s IP address

Contents

Main WARNING! NOTICE TRADEMARKS Contents CHAPTER 4 ConfiguringPhoneSettings..........................21 Page Page Warranty vi Alti-IP600 Manual Effect of State Law Sales Outside the U.S.A. Preface: About This Manual Overview Page An Overview of the Alti-IP 600 Alti-IP 600 Manual 2 Alti-IP600 Manual 3 Hardware Components New in Version Level 12.0.0 System & Network Requirements System Requirements Note: Network Requirements Important: AltiGen IP Phone Service Plug and Play Feature Basic Mode Normal Operation Installation Manual Setup Page Alti-IP600 Manual 9 Parameter Description Alti-IP 600 Manual 10 Parameter Description Apply To Button Copy From Button Important: Notes: To connect the Alti-IP 600H/600PH: Plug and Play Setup Important Notes: Plug and Play Setup Before IP Phone is Started Plug and Play Setup After IP Phone is Started Remote Installation Page Verifying the Phone Startup Process Resolving Errors Upon Startup Active Logon While Another Handset is Already Logged On To the Same Extension Page Operation Notes Page Configuring Phone Settings Important: System Settings Network Settings Alti-IP 600 Manual 22 Modifying DHCP Settings Enabling DHCP Disabling DHCP Configuring IP Settings Assigning a Local IP Address Assigning a TFTP Server Updating Phone Firmware Important: Resolving Errors Upon Startup Configuring NAT Assigning NAT Setting Ring Tones Distinctive Ringing Support Workgroup Status Display Activity Display Page Alti-IP 600 Manual 31 HAPTER Phone Functions Alti-IP 600 Manual 32 Alti-IP 600 Manual 33 Alti-IP 600 Manual 34 Appendix A Specifications FirewallConsiderations 36 Alti-IP 600 Manual Firewall Considerations Ifu sing a firewall in the AltiWare environment, the following network portsare used: Troubleshooting Page LCD Messages Local Menu Configuration Messages Alti-IP 600H/600PH Running Messages LCDMessages 40 Alti-IP 600 Manual Alti-IP 600 Manual 41 IP Phone Boot Messages The following messages may be displayed in the LCD when booting the Alti-IP 600H/600PH: User Reference Basic Phone Operation UserReference 42 Alti-IP 600 Manual Alti-IP 600 Manual 43 Whileon a call with Speaker on Phoneis onhook Fora connected c all: * * Feature Codes AltiServ Feature Codes Phoneis onhook Alti-IP 600 Manual 45 Page Glossary A B D Page K L M N O P Q R S T MailSystem U V W Page Index A B C D I K L M N