AltiGen comm 600 manual Blf

Appendix A

Line Park		During a call:
		1)	Press #51 or Line Park soft key (if configured)
		2)	Enter two-digit Line Park line.
		The LED for Line Park soft key will be lit up and turns off when
		the parked call is picked up, the caller hangs up, or the call is
		routed to voice mail.
Mute		While on a call with Speaker on:
		1)	Press SPKR/MUTE button.
		2)	To disengage mute, press SPKR/MUTE button again.
Program Soft		1)	Press * * 6, then ENTER button; scroll to desired
Key		programmable key to configure; enter appropriate digits for the
		speed dial number or feature code.
Reboot		1)	Press * * 3, then ENTER button
Redial		Phone is onhook
		1)	Press REDIAL button.
		2) Use !/∀ to scroll to the desired entry. (! scrolls to previous
		entry, ∀ scrolls to first entry.)
		3)	Press SPRK/MUTE button or raise handset.
		• Redial up to 16 last calls
		• Redial up to 32 digits.
Release		For a connected call:
		1)	Press RELEASE to hang up the call.
Restore		1)	Press * * 7, then ENTER button, * * 2, then ENTER button
Default
Settings
Ring Tones		1)	Press * * 6, then ENTER button; scroll to SELECT RING.
Soft Key*		1)	Press SOFT KEY 1-10 to initiate one of the following
•	BLF	functions (Busy Lamp Field, AltiServ feature code, speed dial or
		Phone Setting) pre-assigned by the System Administrator.
•	Feature
		Note: Lower left SOFT KEY is set up as FLASH by default. Only
	Code
		this key can be configured for FLASH. All other SOFT KEYS

•Speed Dial are set up as Phone Setting by default.

•Phone Setting

Speaker	To use the speakerphone:
	1) Press the SPKR button

Alti-IP 600 Manual 43