Alti-IP 600 Manual 10
General Allowsyou to specify the IP address of the AltiServ system
theAlti-IP 600 phone is connected to. The version of
softwareassociated with AltiServ is automatically displayed
inth e Version field.
Toallow t he extension user to have password-protected
configurationfunctionality from the phone itself, check the
EnableConfig Password checkbox and assign a numerical
password. When the extension user attempts to configure
features,the user will ne ed to enter the assigned password to
proceed.
Display
Workgroup
Status
Whenenable d, allows the Alti-IP 600 phone to display
workgroupqueue status. While the agent is in idle state, the
firstline of the LCD displaysthe number of queued calls, the
currentlongest queue time, and the last four digits of the
workgroup number; the second line shows the agent state.
(See“Workgroup Status Display” on page 28 fordetailed
information).
H.323 Allowsyou to set the Jitter Buffer in milliseconds, the delay
usedto bu fferv oice packets received from the IP network.
TheJi tter Buffer should be adjusted according to the WAN
bandwidthallocated to data traffic.
Toallo w NAT support for the IP extension, check the
EnableNAT button and enter the public IP address of the
NATrouter.
TFTP Allowsyou to assign the TFTP Server to which th eI P phone
canconnect to for updating firmware when necessary .En ter
theIP address of the TFTP Server in the Server field.
Toupdat e IP phone image, the administrator can check the
ResetIP Phone an d Boot Download checkbox options to
resetand download image to update the phone.
Debug Whenenabled, al lows the Alti-IP 600 phone to connect to
Telnetfor deb ugging.
Parameter Description