Accu-Chek insulin pump Key Combinations, Exiting menus, function screens, One beep in Stop mode

Note:

Increase or decrease the values by pressing the a or s keys. If you want to make large changes to a value, in most cases you can do this faster by pressing and holding down the a or s key (scrolling) until the number you want is displayed. If needed, the value can still be corrected by a single press of the s or a. Your pump will beep once when you start scrolling.

Key Combinations

Keys can be pressed in pairs for additional functions. In the following table, a plus symbol (+) between 2 keys means that both keys must be pressed simultaneously.

Combination	Function
d + a	• exiting menus, function screens, and
	information screens without saving
	• moving backwards to a previous menu
d + s	unlocking the keys (press and hold both
	keys until you hear three beeps in RUN mode
	and one beep in STOP mode.)
a + s	copying an hourly basal rate to the next hour(s)

▲	If the keys on your pump are not functioning properly, or you
!	are not able to identify them correctly, disconnect your
WARNING	insulin pump and contact Pump Support at 1-800-688-4578.

Chapter 1: Understanding Your New System

12

ACCU-CHEK Spirit Insulin Pump