Accu-Chek manual Using the a and s keys of your insulin pump, Cancelling a Quick Standard Bolus

▲	The bolus increment that can be programmed into your
!	insulin pump determines the Standard Bolus amount
WARNING	using the a and s keys of your insulin pump.
	Incorrect programming of the bolus increment may
	cause inappropriate insulin delivery. See the section
	“Bolus Increment” (page 131) for more information.

Cancelling a “Quick” Standard Bolus

–during programming (the bolus amount blinks):

•Press the key s or a you used to enter the “Quick” Standard Bolus programming option. This will reset the bolus amount to 0.0 units. A melody will play. If no new bolus is programmed, your pump returns to the RUN screen and beeps three times after five seconds.

No bolus is delivered.

–during confirmation (when the beeps and vibrations occur), or during the start delay ( blinks):

•Press s or a. A melody plays. Your pump returns to the RUN screen. An alert A8: BOLUS CANCELLED occurs. Press f twice to confirm and turn off the alert. See the section “Alert A8: BOLUS CANCELLED” (page 153) for more information.

No bolus is delivered.

–during bolus delivery (countdown of bolus amount):

•Press and hold s or a for 3 seconds until you hear a melody. An alert A8: BOLUS CANCELLED occurs. Press f twice to confirm and turn off the alert.

Bolus delivery is interrupted.

See the section “Alert A8: BOLUS CANCELLED” (page 153) for more information.

Chapter 4: Boluses and TBRs

79

ACCU-CHEK Spirit Insulin Pump