Accu-Chek insulin pump manual Status Screen Messages, Beeps, and Vibrations

Follow the steps below to navigate through the screens.

1.Press the dkey to move to a screen displaying your first choice. Think of these screens as menu choices.

2.Press the d key again to see your next choice on the menu. After you reach the last menu choice you will “loop” back to the first menu choice.

3.When you reach the screen displaying the choice you want (e.g., SET THE TIME AND DATE), press f. The next set of screens are called function screens. They all relate to the choice you made. There may be only one function screen or multiple screens.

4.Press the aor skey to increase or decrease the selected value. Or, press the dkey again to move to the next function screen you want to change. After you reach the last function screen you will “loop” back to the first function screen.

5.Press fto save your changes. The pump returns to the RUN or STOP screen and the changes are saved.

Note:

The menu choices that appear depend on the menu that is selected. Your pump can display a Standard, Advance, or Custom user menu. See the section “User Menus” (page 99) for more information.

Pressing d+ a simultaneously lets you move backwards in the menu structure or to return to menus you just skipped. If you are within a function screen, pressing d+a simultaneously lets you move up to the corresponding menu without saving the current changes.

STATUS Screen Messages, Beeps, and Vibrations

Beeps, vibrations, and messages on the display inform you of the status of your insulin pump. Beeps and/or vibrations are used as alarm signals. Your insulin pump also beeps when a key is pressed unless the beep volume is turned off. The beep volume can be turned up or down.

Chapter 1: Understanding Your New System

15

ACCU-CHEK Spirit Insulin Pump