Accu-Chek insulin pump manual System Check Start-Up Process, Insulin pump, Pump Support at

System Check Start-Up Process

Your pump performs internal tests at start-up when you insert a battery and when you change the cartridge. When you insert a battery the whole start-up process is performed. When only the cartridge is changed, the start-up process begins at the SELF-TEST screen.

▲	Do not interrupt the start-up process by pressing keys
!	or by handling the insulin pump. Interruption of the
WARNING	start-up process may lead to malfunctions of your
	insulin pump.
	If your insulin pump does not beep and vibrate as
	described, or if individual numbers, letters, symbols
	or lines are shown incompletely or not at all, contact
	Pump Support at 1-800-688-4578.

Note:

While you are using the pump, its safety system monitors it continuously. If the safety system detects a change from the normal state, an alert (warning instruction) or an error (error message) occurs.

1.Put the pump in STOP mode.

2.The ACCU-CHEK logo appears.

Chapter 2: Getting Started

28

ACCU-CHEK Spirit Insulin Pump