The Standard Bolus symbol ( ) blinks for five seconds (the bolus delivery start delay).

After this bolus delivery start delay, your pump beeps three times and begins to deliver the total bolus amount programmed. The countdown of the remaining bolus amount appears on the display.

Cancelling a Menu-Guided “Scroll” Standard Bolus

during programming (the bolus amount blinks):

You have three options for cancelling a “Scroll” Standard Bolus during programming:

If you do not press any key for 20 seconds, your pump returns to the RUN screen (timeout).

Exit to the STANDARD BOLUS menu by pressing d+asimultaneously.

Set the bolus amount to 0.0 units. Press f to exit.

No bolus is delivered.

during the start delay ( is blinking):

Press s or a. A melody plays. Your pump returns to the RUN screen. An alert A8: BOLUS CANCELLED occurs. Press f twice to confirm and turn off the alert.

No bolus is delivered.

Please refer to section “Alert A8: BOLUS CANCELLED” (page 153) for more information.

during bolus delivery (countdown of bolus amount):

Press and hold s or a for 3 seconds until you hear a melody. An alert A8: BOLUS CANCELLED occurs. Press f twice to confirm and turn off the alert.

Bolus delivery is interrupted.

Please refer to section “Alert A8: BOLUS CANCELLED” (page 153) for more information.

Chapter 4: Boluses and TBRs

81

ACCU-CHEK Spirit Insulin Pump

Page 82
Image 82
Accu-Chek insulin pump Cancelling a Menu-Guided Scroll Standard Bolus, Set the bolus amount to 0.0 units. Press f to exit