54
VQT2Z66
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥Change the mode to .
≥Set the iA/MANUAL/FOCUS swit ch to manual mode. (l61)
≥This function’s default setting is [ON].
≥When changing to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and
the setting cannot be changed.
≥You may not see the full effect depending on the recording conditions.
≥If wind sound cannot be reduced with the wind noise canceller function alone, set
[BASS SETTING] to [LOWCUT]. (l56)
Directivity of the microphone is interlocked with the zoom operation. Sounds near the front of
the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥Change the mode to .
≥Set the iA/MANUAL/FOCUS swit ch to manual mode. (l61)
[WIND NOISE CANCELLER]: [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON]
[ZOOM MIC]: [RECORD SETUP] # [ZOOM MIC] # [ON]
MENU
MENU
HDC-MDH1GC-VQT2Z66_mst.book 54 ページ ２０１０年８月４日 水曜日 午前９時２９分