48
VQT2Z66
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
≥The fade setting is cancelled when the recording stops.

∫To select the colour for fade in/out

: [RECORDSETUP] # [FADE COLOUR] #
[WHITE] or [BLACK]
≥The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white
saturation in bright parts at the same time. Both bright and dark parts can be recorded
clearly.
≥If there are extremely dark or bright parts or the brightness is insufficient, the effect may not
be clear.
This allows recording of the pictures and sound to start approximately 3 seconds
before the recording start/stop button is pressed.
≥ appears on the screen.
≥Aim the unit at the subject beforehand.
≥There is no beep sound.
≥PRE-REC is cancelled in the following cases.
jIf you change the mode.
jIf you remove the SD card.
jIf you press the MENU button.
jIf you turn the unit off.
jIf you start recording.
jAfter 3 hours have passed
≥
After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken
3 seconds before pressing the recording start/stop button cannot be recorded.
≥Images displayed on the thumbnail in playback mode will differ from the motion pictures
displayed at the start of playback.
FadeIntelligent contrast controlPRE-REC
This prevents you from missing a shot.
(Fade in)
(Fade out)
MENU

PRE-REC

PRE-REC
HDC-MDH1GC-VQT2Z66_mst.book 48 ページ ２０１０年８月４日　水曜日　午前９時２９分