103
VQT2Z66
White round spots like
soap bubbles appear
on the recorded
picture.
If you take a picture
with the flash in a dark
place or indoors, white
round spots may
appear on the picture
caused by the flash
reflecting of particles of dust in the air. This is not a
malfunction.
A characteristic of this is that the number of round
spots and their position differ in every picture.
“ERROR OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN ON
AGAIN.” is displayed.
The unit has automatically detec ted an error. Restart
the unit by turning off and on.
The unit will be turned off in about 1 minute if the unit
is not turned off and on.
Repair is needed if it is repeatedly displayed even if
it is restarted. Detach the power connected, and
consult the dealer who you purchased this unit from.
Do not attempt to repair the unit by yourself.
VIERA Link does not
work.
[Setting on this unit]
Connect with a HDMI cable (option al). (l80)
Press the MENU button, then select [SETUP] #
[VIERA Link] # [ON] using the cursor button. (l80)
Turn the unit off and then back on again.
[Setting on other devices]
If the TV input does not switch automatically, switch
the input using the TV remote control.
Check the VIERALink setting on the connected
device.
Please refer to the operating instructions of the
connected device.
When connected by
the USB cable, this
unit is not detected by
the PC.
After re-inserting the SD card into the unit, reconnect
the supplied USB cable.
Select another USB terminal on the PC.
Check the operating environment. (l87, 96)
Connect the supplied USB cable again after
restarting the PC and turning on this unit again.
Problem Check points
HDC-MDH1GC-VQT2Z66_mst.book 103 ページ 2010年8月4日 水曜日 午前9時29分