92
VQT2Z66
With a PC
Setup 2Connecting to a PC
≥Connect this unit to the PC after the software applications are installed.
≥Remove the supplied CD-ROM from your PC.
AUSB cable (supplied)
1Connect this unit to the AC adaptor.
≥It is possible to use it connected to the PC with the batteries only, but you will not be able to
write data into the unit.
2Turn on the unit.
≥This function is available in all modes.
3Connect this unit to a PC.
≥The USB function selection screen will appear.
4Touch [PC] on the screen of this unit.
≥The Smart wizard screen is automatically displayed when HDWriter AE 2.5S is installed.
≥This unit is automatically recognised as an external drive of the PC. (l94)
≥When you select an option other than [PC], reconnect the USB cable.
≥When using the battery, the LCD monitor turns off after about 5seconds. Touch the screen
to turn the LCD monitor on.
HDC-MDH1GC-VQT2Z66_mst.book 92 ページ 2010年8月4日 水曜日 午前9時29分