18
VQT2Z66
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
1Connect the AC cable to the AC adaptor and the AC outlet.
2Connect the DC cable to the AC adaptor.
3Connect the DC cable to the DC input terminal [DCIN].
When removing the AC adaptor, be sure to set the power switch to OFF and the status
indicator goes off. Then remove the AC adaptor.

Connecting to the AC outlet

DC IN

ADC output terminal
BDC input terminal
Insert the DC cable matching the
[ ] mark of the DC input
terminal.
HDC-MDH1GC-VQT2Z66_mst.book 18 ページ 2010年8月4日 水曜日 午前9時29分