100
VQT2Z66
Others
Troubleshooting
Problem Check points
This unit cannot be
turned on.
This unit does not stay
on long enough.
Battery runs down
quickly.
≥Charge the battery again to ensure it is sufficiently
charged. (l15)
≥In cold places, the battery using time becomes
shorter.
≥The battery has a limited life. If the operating time is
still too short even after the battery is fully charged,
the battery has worn out and needs to be replaced.
This unit is turned off
automatically.
≥If the unit turns off when you turn off the power to the
TV using the TV remote control, the VIERALink is at
work. If you are not using the VIERALink, set
[VIERA Link] to [OFF]. (l80)
A clicking sound is
heard when the unit is
shaken.
≥This is the sound of the lens moving and is not a
defect.
This sound will no longer be heard when the unit is
turned on
and change the mode to or .
Remaining battery
indication is not
displayed properly.
≥The remaining battery capacity indication is an
approximation.
If the remaining battery capacity indication is not
displayed correctly, fully charge the battery,
discharge it and then charge it again.
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
≥Remove the battery or AC adaptor, wait about
1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute later, turn on the unit
again. (Conducting the above operation while the
media is being accessed may damage the data on
the media.)
≥If normal operation is still not restored, detach the
power connected, and consult the dealer who you
purchased this unit from.
Item other than the
touched one is
selected.
≥Calibrate the touch screen. (l42)
HDC-MDH1GC-VQT2Z66_mst.book 100 ページ ２０１０年８月４日　水曜日　午前９時２９分