102
VQT2Z66
Scenes cannot be
deleted.
≥Release the protect setting. (l75)
≥Any scenes/still pictures where the thumbnails are
displayed as cannot be deleted. If the scenes/
still pictures are unnecessary, format the media to
erase the data. (l41) Please be aware that if a
media is formatted then all the data recorded on the
media is erased and cannot be recovered. Back up
important data on a PC, disc etc.
If the SD card is
inserted in this unit, it
is not recognised.
≥If the SD card is formatted on a PC, it may not be
recognised by this unit. Use this unit to format SD
cards. (l41)
If the SD card is
inserted in another
device, it is not
recognised.
≥Check that the device is compatible with the capacity
or type of SD card (SD Memory Card/SDHC Memory
Card/SDXC Memory Card) that you inserted. Refer
to the operating instructions of the device for details.
Colour or brightness
of the image changes,
or you may see
horizontal bars in the
image.
The LCD monitor
flickers indoors.
≥Colour or brightness of the image may change, or
you may see horizontal bars in the image when the
object is recorded under fluorescent light, mercury
light or sodium light, etc., but this is not a
malfunction.
≥In motion picture recording mode, record in
intelligent auto mode or set the shutter speed to
1/100 in areas where the power supply frequency is
50 Hz, or 1/125 in areas of 60Hz .
≥In still picture recording mode, this will not affect the
recorded image.
Object seems to be
warped.
≥Object seems to be warped slightly when the object
moves across the image very fast, but this is
because the unit is using MOS for the image sensor.
This is not a malfunction.
Problem Check points
HDC-MDH1GC-VQT2Z66_mst.book 102 ページ ２０１０年８月４日 水曜日 午前９時２９分