Philips 22PFL3504D/F7E Manage Cables, Connect to a Direct Broadcast Satellite DBS, Ant, Hdmi

Page 10

Connect to a Direct Broadcast Satellite (DBS)

There are two main DBS systems: DirecTV and DishNetwork.These systems require a separate, proprietary set-top box to decode signals and send them to the TV.The set-top box contains a digital TV tuner for receiving off-air digital broadcasts.

Contact your local DBS provider for more information about the connections and the TV channels.

Connect to a set-top box

A cable box or satellite set-top box can be connected to the TV through the following connections:

•ANT

•A/V (Composite Video and Audio)

•S-Video

•YPbPr (Component Video Input)

•HDMI

For information about how to connect a set-top box, see the Quick Start provided.

Connect a set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel speciﬁed by the service provider.

Connect a set-top box through component video input or HDMI

Manage Cables

Route your antenna cable and all other cables through the cable holder	glish
at the back of the TV.The holder helps keep your cables tidy and easily	En

manageable.

1 Attach the cable holder as illustrated below.

2 Keep the cable through this holder to avoid tangle them.

EN 9

Image 10

Contents Register your product and get support at Contents Notification directly from the manufac Which youre entitled, including specialGrounding Conductors Ground ClampsUSA Inc Koninklijke Philips Electronics N.V. All rights reservedPhilips Model 19PFL3504D, 22PFL3504D AddressEnvironmental Care Product InformationScreen Care Regulatory NoticesStandby indicator / remote control sensor Side Controls and IndicatorsRemote Control Your TVInfo Position the TV Insert the Remote Control BatteriesGet Started Connect the Antenna or CableANT Manage CablesConnect to a Direct Broadcast Satellite DBS Composite Video and Audio YPbPr Component Video InputPress OK to ﬁnish Settings assistant Switch on and Set Up the TVPress OK to begin Settings Assistant Finish the SetupUse Your TV Switch Your TV on/off or to StandbySwitch Channels This section helps you perform basic TV operationsWatch Channels from a Set-top Box Adjust VolumeStill Mode Watch Connected DevicesSwitching Audio Mode Watch a DVDChange Picture and Sound Settings Use More of Your TVSummary of picture formats Supported screen resolutionsFor 43 video signal Use your TV as a PC monitorSet the Sleeptimer Use Auto PIC ModeUse Auto Sound Mode Change sound settingsChange your PIN Use Child Control and Rating LocksSet your PIN Lock a channelSummary of US Movie ratings Summary of TV ratingsUse the movie ratings lock Summary of Canadian English ratingSelect DTV caption services Select caption servicesSummary of caption services View Closed Captions subtitlesEnergy Saving Mode Press or select the desired mode, then press OKSelect Your Menu Language Install ChannelsAutomatically Install Channels Set Your Location to HomePress Menu on the remote control and Setup Add Channels Optimize the Signal Quality from Your AntennaAdd Channels Check Your Current Software Version Update Your TV SoftwarePrepare for the Software Upgrade Download the softwareConnect Devices Connection OverviewHdmi Highest quality Select Your Connection QualityVideo Good quality Composite Basic quality Component Y Pb Pr High qualityConnect Your Devices Connect a PC Connect a set-top box via a composite connectorConnect a digital home theater ampliﬁer VideoDownload an electronic copy TroubleshootingContact us Product Information Warranty Index Sound settings Standby Subtitles TroubleshootingVolume Adjust Auto Volume Leveling mute YPbPr Antenna Cables Component Composite32 EN Energia Televisor a Color DE Cristal Liquido LCDImportador MEXICANA. S.A. DE C.V