Watch a DVD
To watch a DVD
1 Insert a DVD disc into your player.
2 Press 
on the remote control of the DVD player to select channels.
»The DVD might automatically play on the TV. If the picture does not appear
1Press SOURCE repeatedly to select the DVD player and wait a few seconds for the picture to appear.
2Use the remote control of the DVD player to play the disk.
Switching Audio Mode
This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.
TV
Press SAP to display the currently selected audio mode.While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.
6
SAP / STEREO
When all audio are available
SAP / STEREO
SAP / MONO 
SAP / STEREO
When stereo and monaural audio are available
MONO / STEREO
MONO / STEREO
When SAP and monaural audio are available
SAP / MONO 
SAP / MONO 
When only monaural audio is available
MONO
(cannot be switched)
STEREO : Outputs
SAP : Outputs second audio program
MONO : Outputs
DTV
1 Press SAP to display the currently selected language and the number of available languages.
6.1
English 1/3
2 Press SAP repeatedly to cycle through the available audio languages.
•Available languages differ depending on the broadcast. [Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.
Note
•SAP does not control external audio devices.
•The information display will automatically disappear in a few seconds.
English
EN 13