Restricting access to digital channels
You can restrict access to digital channels.
Opting to use a pin code
1.If you are in analogue mode, switch to
digital mode by pressing the
key on the remote control.
2.Press the 
key to display the setup menu.
3.Press the ï key to select Access restrictions, and press the Æ key.
4.Press the Æ key to enter into the Set pin code protection menu.
Setup |
| 11:28 |
|
Access restrictions |
|
|
|
Set pin code protection | On | Off | |
Maturity rating |
|
|
|
TV channels
Radio stations
Change pin code
Switch pin code protection ‘on’ or ‘off’
Close
4.Press the ï key to select Change pin code.
5.Press the Æ key to enter into the Change pin code menu.
6.Follow the
The default pin code is 1234.
If you forget your pin code, reset to the default pin code by entering the universal code 0711.
Options for restricting access to digital channels
This list describes the submenu options for access restrictions.
•Maturity rating
To select a rating at which a programme is blocked. This feature works only for programmes that are broadcast with a rating.
5.Press the Í or Æ key to select On, and press the u key to exit.
Warning: When you opt to use a pin code, you must use that pin code when you schedule a programme for recording.
6.Press the Í key to return to the previous menu.
7.Press the
key to exit the menu.
Changing your pin code
1.If you are in analogue mode, switch to
digital mode by pressing the
key on the remote control.
2.Press the
key to display the setup menu.
•TV channels
To select a TV channel to block.
•Radio stations
To select a radio station to block.
•Change pin code
To change your pin code.
Using the Common Interface slot
Your TV is equipped with a Common Interface (CI) slot. For information about using the CI slot see Using conditional access on page 22.
3.Press the ï key to select Access restrictions, and press the Æ key.
16