Tuning analogue channels automatically
You can automatically search for and store analogue channels.
1.If you are in digital mode, switch to
analogue mode by pressing the
key on the remote control.
2.Press the 
key to display the Main menu.
Main |
|
Picture | Brightness |
Sound | Colour |
Ambilight* | Contrast |
Features | Sharpness |
Install | Colour Temp |
| More Option... |
*Available in selected models
3.Press the Î or ï key to select Install, and press the Æ or u key to enter the Install menu.
Main |
|
Picture | Auto Store |
Sound | Manual Store |
Ambilight* | Sort |
Features | Name |
Install | Favourite Program |
*Available in selected models
4.Select Auto Store, and the press the Æ or u key to automatically search for channels.
All of the available channels are stored. The auto store operation takes a few minutes. The following display shows the progress of the search and the number of channels found.
Auto Store
Program | 3 | ||
TV | 196 MHz | ||
|
|
|
|
|
|
|
|
|
|
|
|
To exit or interrupt the search before it is
complete, press the
key.
If you interrupt an auto store, not all of the channels are stored. To store all channels, restart the auto store again.
Automatic Tuning System (ATS)
If the transmitter or cable network sends an automatic sort signal, the programmes are numbered correctly. In this case, the installation is complete. If an automatic sort signal is not available, you can use the Sort menu to number the programmes.
Automatic Channel Installation (ACI)
If a cable system or a TV channel that broadcasts ACI is detected, a programme list appears. If ACI is not available, the channels are numbered according to your selected language and country. If ACI is not available, you can use the Sort menu to renumber the channels.
Note: You cannot change the language or country in analogue mode. To change the language or country, exit the analogue mode and enter the digital mode. For more information, see Selecting your language and location on page 14.
23