Philips 3135 035 21372 setup guide Using the PICTURE-IN-PICTURE PIP Feature, Using the PIP Buttons

USING THE PICTURE-IN-PICTURE (PIP) FEATURE

Picture-In-Picture (PIP) is the showing of two pictures on the TV screen at the same time—one main screen picture and one

small picture, or PIP. Because your set has two tuners, you can enjoy all the benefits of PIP without using a VCR as a second tuner for your PIP picture. Tune to your favorite show on the main screen with tuner one while scanning other channels with tuner two in the PIP window. Also view the AV1, AV2, or AV3 sources in the PIP window. NOTE: CVI cannot be displayed in the PIP win- dow, and AV4 and AV5 do not function with PIP. For information on connecting accessory devices to the AV inputs, see the Directions for Use manual that came with your set. Connection information begins on page 6.

PIP Window

Main Screen

USING THE PIP BUTTONS

Using the PIP buttons on the remote, you can move the PIP window around and swap it with the main screen. You can also freeze the PIP window picture. Perform the steps below to

practice using the PIP buttons.

1 Press the PIP on/off button to show the PIP window. The window appears in a corner of the TV screen. Press the PIP on/off button again to reduce the PIP window size, and a third time to remove the PIP window from the screen. Press the PIP on/off button again to show the PIP window.

2 Press the PIP CH DN/UP buttons to tune to channels in the PIP window.

If you press and hold the PIP CH UP button for three sec- onds, the set will automatically perform a forward scan for channels. Press and hold the PIP CH DN button for three seconds, and the set will automatically perform a back- ward scan for channels. Auto scanning will stop if you press any key, and it will also stop upon reaching the channel at which scanning began.

3 Press the PIP POSITION button to move the PIP win- dow from corner to corner on the TV screen.

4 With PIP on the TV screen, press the SWAP button to swap the main and PIP pictures. Press SWAP again to swap the pictures back.

POWER

4 2 5

TV	VCR	ACC
		ACTIVE
SWAP	PIP CH	CONTROL FREEZE
DN	UP
SOUND		PICTURE
STATUS/		MENU/
EXIT		SELECT
	MUTE
VOL		CH

	1	2	3
	4	5	6
3	7	8	9	1,6
	TV/VCR	0
	A/CH		SURF
		POSITION	PIP

HELPFUL HINT

When you press the PIP on/off button to show the PIP win- dow, the window will appear where it was located the last time it was displayed.

POSITION

SWAP

Ski Vacations

P.O. Box 55512

Anytown, USA 87654

1-800-555-1212

NOTE: The CVI source is not accessible in the PIP win- dow, so it cannot be swapped between the main screen and PIP.

5 Press the FREEZE button to stop motion within the PIP window.

The FREEZE button allows you plenty of time to write down on-screen information such as phone numbers or addresses.

6 Press the PIP on/off button, multiple times if necessary, to remove the PIP window from the screen.

WARNING

To prevent uneven picture tube aging, do not leave stationary images on screen for extended periods of time. Vary your picture viewing. See page 60 in the Directions for Use manual.

FREEZE

ADJUSTING PIP TINT AND COLOR

The Picture-in-Picture (PIP) TINT control allows you to adjust the PIP picture to obtain natural skin tones. The COLOR con-

trol allows you to fine tune the color.

1 Press the MENU/SELECT button. The onscreen menu appears. Then press the CURSOR RING DOWN twice to highlight FEATURES.

2 Press the CURSOR RING RIGHT to enter the FEA- TURES submenu. Then press the CURSOR RING DOWN repeatedly until the PIP item is highlighted. Press the CUR- SOR RING RIGHT to enter the PIP submenu.

3 Press the CURSOR RING RIGHT or LEFT to adjust the TINT or COLOR to the desired level.

4 Press the STATUS/EXIT button to exit the menu.

	FEATURES
	TIMER		TINT	FEATURES
	AutoLock
				PIP
	PIP
				TINT	44
	CLOSED CAP
				COLOR
	FORMAT
			POWER
				FEATURES
				PIP
				TINT
				COLOR	44
	TV	VCR	ACC
			ACTIVE	2,3
4	SWAP	PIP CH	CONTROL FREEZE
	SOUND	UP
	DN
			MENU/
			SELECT
		MUTE		1
	VOL		CH
	1	2	3
	4	5	6
	7	8	9
	TV/VCR	0
	A/CH		SURF

7