Philips 3135 035 21372 Adjusting the Manual Converge Controls, Converge RED/BLUE, Screen

ADJUSTING THE MANUAL CONVERGE CONTROLS

CONVERGE RED/BLUE

Bumps and vibrations, moving the set, or the presence of magnetic

fields (from speakers, for example) can cause the beams of

light coming from the TV’s three color projection tubes to become misaligned. The result is color haloes, or outlines, around por- tions of the picture. If your picture looks okay, there’s no need to adjust convergence. If your TV’s picture has the color haloes, how- ever, refer to the chart to the right for guidance as to which conver- gence controls to use, then follow the simple steps below.

1 Press the MENU/SELECT button. The menu appears. Press the CURSOR RING RIGHT to enter the PICTURE submenu. Then press the CURSOR RING DOWN until MANUAL CONVERGE is highlighted.

2 Press the CURSOR RING RIGHT to enter the MANUAL

CONVERGE submenu. If you want to adjust the Red Convergence, press the CURSOR RING RIGHT to enter the adjust mode. If you want to adjust the Blue Convergence, press the CURSOR RING DOWN to highlight CONVERGE BLUE, then press the CURSOR RING RIGHT to enter adjust mode.

3 In adjust mode, press the CURSOR RING RIGHT, LEFT, UP, or DOWN to adjust the cross hair until the color halo around it is gone. (The adjustment is automatically saved in the TV’s memory.) To return to the MANUAL CONVERGE menu, press the MENU/SELECT button. To exit the on-screen display, press the STATUS/EXIT button.

Screen		PICTURE
Appearance	Actions
		MANUAL CONVERGE
Various parts	Adjust the	CONVERGE RED
of the picture	CONVERGE	CONVERGE BLUE
		MULTIPOINT RED
have red	RED control.
		MULTIPOINT BLUE
haloes.	Then if any	SAVE MULTIPOINT
	red haloes					Converge Red
	remain, adjust
	the MULTI-
	POINT RED			POWER
	control.
Various parts	Adjust the
of the picture	CONVERGE
have blue	BLUE control.	TV	VCR	ACTIVE
				ACC
haloes.	Then if any	SWAP	PIP CH	CONTROL FREEZE	2,3	Converge Red
		DN	UP
	blue haloes	SOUND
	remain adjust
	the MULTI-	STATUS/		MENU/
	POINT BLUE	EXIT		SELECT
	control.
			MUTE	CH 1
		VOL
		1	2	3
		4	5	6
		7	8	9
		TV/VCR	0
		A/CH		SURF

MULTIPOINT RED/BLUE

The Multipoint Red/Blue Convergence controls enable you to adjust the convergence at specific points on the TV screen.

NOTE: The on-screen display will leave the screen after 20 seconds of inactivity. If this happens, simply press the MENU/SELECT button to bring the MANUAL CONVERGE submenu back.

1 Press the MENU/SELECT button. The menu appears. Press the CURSOR RING RIGHT to enter the PICTURE menu. Then press the CURSOR RING DOWN until MAN- UAL CONVERGE is highlighted.

2 Press the CURSOR RING RIGHT to enter the MANU- AL CONVERGE submenu. Press the CURSOR RING DOWN until MULTIPOINT RED or MULTIPOINT BLUE is highlighted. Then press the CURSOR RING LEFT or RIGHT to enter Navigate mode.

3 Press the CURSOR RING LEFT, RIGHT, UP, or DOWN to move to a cross hair that has a color outline. Then press the STATUS/EXIT button to enter adjust mode.

4 Press the CURSOR RING LEFT, RIGHT, UP, or DOWN to adjust the cross hair image until the color outline is gone. Then press the STATUS/EXIT button to return to NAVIGATE mode. Repeat steps 3 and 4 until all misaligned cross images have been adjusted.

PICTURE
	MANUAL CONVERGE	PICTURE
	CONVERGE RED		MANUAL CONVERGE
	CONVERGE BLUE			CONVERGE RED
	MULTIPOINT RED
				CONVERGE BLUE
	MULTIPOINT BLUE
				MULTIPOINT RED
	SAVE MULTIPOINT		▲	MULTIPOINT BLUE
				▲	É

SAVE MULTIPOINT

POWER

	TV	VCR	ACC		to Navigate Exit to Adjust
3,4 SWAP			ACTIVE	2
		DN PIP CH UP	CONTROL FREEZE
	STATUS/		MENU/
	EXIT		SELECT
6		MUTE			1,5
	VOL		CH

to Navigate Exit to Adjust

1 2 3

4 5 6

to Navigate Exit to Adjust

to Adjust Exit to Navigate

to Adjust Exit to Navigate

PICTURE

MANUAL CONVERGE

5 After making your adjustments, you must store them in the TV’s memory using SAVE MULTIPOINT.

NOTE: If you are not satisfied with the adjustments you just made and want to start over, you can use the UNDO MULTIPOINT control. This control allows you to undo the adjustments, but it will work only if you use it before sav- ing.

To save your multipoint adjustments, press the MENU/SELECT button. This returns you to the MANU- AL CONVERGE menu. Press the CURSOR RING DOWN until SAVE MULTIPOINT is highlighted. Then press the CURSOR RING LEFT or RIGHT to store your adjust- ments in the TV’s memory.

OR

7	8		9		CONVERGE RED
TV/VCR	0				CONVERGE BLUE
A/CH			SURF		MULTIPOINT RED
				▲	MULTIPOINT BLUE
					▲	É
					SAVE MULTIPOINT
	POSITION	PIP	to Adjust Exit to Navigate
				SAVE MULTIPOINT
			PICTURE	PICTURE
			MANUAL CONVERGE	MANUAL CONVERGE
			CONVERGE RED		CONVERGE RED
			CONVERGE BLUE		CONVERGE BLUE
			MULTIPOINT RED		MULTIPOINT RED
			▲ MULTIPOINT BLUE	▲	MULTIPOINT BLUE
			SAVE MULTIPOINT		SAVE MULTIPOINT	STORED

To undo the multipoint adjustments you just made, press the MENU/SELECT button. This returns you to the MANUAL CONVERGE menu. Press the CURSOR RING DOWN until UNDO MULTIPOINT is highlighted. Press the CURSOR RING LEFT or RIGHT to undo the adjustments. Press the CURSOR RING UP until MULTI- POINT RED or MULTIPOINT BLUE is highlighted. Press the CURSOR RING LEFT or RIGHT to enter Navigate mode. Then Follow steps 3–5 above to make your adjust- ments again.

OR

To restore the TV’s convergence to factory settings, press the MENU/SELECT button. This returns you to the MANUAL CONVERGE menu. Press the CURSOR RING DOWN until RESTORE FACTORY is highlighted. Then press the CURSOR RING LEFT or RIGHT to restore the TV’s convergence to factory settings.

6 Press the STATUS/EXIT button to exit the submenu.

HELPFUL HINT

If you should experi- ence a power outage before saving your mul- tipoint-convergence set- tings, your settings will be lost.

			OR
		UNDO MULTIPOINT
PICTURE				PICTURE
	MANUAL CONVERGE				MANUAL CONVERGE
	CONVERGE BLUE				CONVERGE BLUE
	MULTIPOINT RED				MULTIPOINT RED
	MULTIPOINT BLUE				MULTIPOINT BLUE
	▲ SAVE MULTIPOINT				▲ SAVE MULTIPOINT
	UNDO MULTIPOINT				UNDO MULTIPOINT	RESTORED

			OR
		RESTORE FACTORY
PICTURE				PICTURE
	MANUAL CONVERGE				MANUAL CONVERGE
	MULTIPOINT RED				MULTIPOINT RED
	MULTIPOINT BLUE				MULTIPOINT BLUE
	SAVE MULTIPOINT				SAVE MULTIPOINT
	▲ UNDO MULTIPOINT				▲ UNDO MULTIPOINT
	RESTORE FACTORY				RESTORE FACTORY	RESTORED

8