RADIO OPERATION
Select waveband/memory level
This radio receives stations in the VHF (FM) waveband as well as MW and LW (AM) sta- tions. Three memory levels are available for the FM waveband, and one memory level is available for each of the MW and LW bands. Six stations can be stored on each memory level.
Selecting the FM memory level
In order to switch between the FM memory levels
➮press the softkey, 4, indicating “NEXT” as often as necessary for the desired memory level to be shown in the display.
The memory levels are called up in the se- quence FM I, FM II and FMT.
Selecting the waveband
In order to select one of the FM, MW or LW bands
➮press the TUNE button, >, when the radio is operating.
The radio function menu is shown on the dis- play.
➮Press the softkey, 4, indicating “BND” as often as necessary for the desired waveband to be shown in the display.
To return to the basic radio menu
➮Press the TUNE button, >, or wait for eight seconds. The settings are then saved.
Setting the station
There are a number of ways to set the sta- tion.
Automatic station search
➮Press the 
or 
button, 7.
The next station that can be received is tuned in.
Manual station tuning
You can also tune to the station manually.
➮Press the 
or
button, 7.
Note:
Manual station tuning is only possible if the RDS convenience function is deactivated.
Browsing a chain of stations (FM only)
If a station is providing several programs it is possible to browse through this “chain” of sta- tions.
➮Press the 
or
button, 7, in order to change to the next link in the station chain.
Note:
In order to use this function, the RDS con- venience function must be active.
You can only change in this way to a station that you have already received once. To do this, use the Scan or Travelstore functions.
Adjusting the sensitivity of the station search
You can choose whether to search only for stations with strong signals, or whether weak stations should be included.
➮Press the MENU button, 8.
➮Press the 
or 
button, 7, as often as is necessary for
The current value of the sensitivity is shown on the display. “SENS 6” indicates the maxi- mum sensitivity for the reception of distant transmitters, and “SENS 1” indicates the low- est sensitivity.
➮Adjust the desired sensitivity with the 
key, 7.
➮Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.
42
