Switch on for the first time
The first time the TV set is switched on, a congratulation message will appear on screen. The language of which changes every 5 seconds. If the menu is not displayed, press and hold down the MENU button on the side of the TV set for 5 seconds to display the menu.
&Press the OK button on the remote control, the moment your prefered language is visible on the screen.The Setup menu is displayed
éThe language, corresponding country and time zone is now preselected according to the opening screen. However, you can still change your preferences before you start a service scan.
“With the cursor keys, select language, country or Time zone and check if the adjustment is according to your preferences. If necessary, use the cursor keys to make your adjustment and press OK to exit. CAUTION : if you select a wrong country, the channel numbering will not be according to the standard for your country.
‘Select service scan from the menu and press OK to start the installation.The service scan menu is displayed. All the digital and analogue programmes are searched for and stored automatically. When the search is complete, the menu will indicate the number of digital services and analogues programmes found.
(Press the OK key twice to start watching TV. The television then displays the current programme.The installation is now complete.
NOTE : If at some point of time you decide to reset to the factory default settings, press and hold down the MENU button on the side of the TV set for 5 seconds.A congratulation message will appear on screen. Repeat steps
1 - 5 as if this was the first time you have turned on the TV.
8