Philips 42/50PF9966 manual Record with your recorder with EasyLink, Connect your computer

Page 23

Connect your computer

AUDIO DVI

L

R

1

2

&Connect one end of a VGA cable 1 (if necessary via a supplied VGA to DVI adaptor) to the video card of the

computer and the other end to the DVI connector at the bottom of the TV.

Fix the connectors firmly with the screws on the plug.

éIn case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO R (right) and L (left) inputs.

The DVI connector allows the following TV and monitor display modes:

EDTV

640/720 x 480p

 

 

720 x 576p

 

 

HDTV

1920 x1080i

 

 

 

1280 x 720 p

(only 50PF9966)

VGA

640 x 480

60

Hz

SVGA

800 x 600

60

Hz

XGA

1024 x 768

60

Hz (only 50PF9966)

To select connected equipment

Press the v key on the remote control repeatedly, or select Source in the Setup menu (see p. 10) to select EXT1, EXT2, EXT3, Side or DVI according to where you connected your equipment.

Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.

Recorder or DVD with EasyLink

The recorder or DVD can be operated with the remote control via the Recorder or DVD menu on screen.

Recorder

Òp ‡ π † ® Ï

Rwd Play Stop Play Ffw Rec Eject

DVD

Òp ‡ π † Ï

Prev. Play Stop Play Next Eject

&Press the MENU key on the remote control.

éSelect the Recorder or DVD menu with the cursor up/down.

Press the cursor left/right, up/down to select one of the recorder or DVD functions.

The key ® for recording can be operated in the TV mode.

If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.

Record with your recorder with EasyLink

In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen. Continue to press the ® record key on the remote control for more than 2 seconds.

Note: Switching programme numbers on your TV does not disturb recording !

When recording a programme from a peripheral connected to EXT1, EXT3 or Side, you can not select another TV programme on the screen without disturbing the recording.

21

Image 23
Contents Page Information for users in the UK Contents Keys on the right side of the TV PreparationUse of the remote control RC4302 Active screen selection Menu/Remote control infoOn Screen information Smart surf / Nextview themesSelect the menu language and country InstallationTo use the menus Select your choice with the cursor right Automatic installationManual installation Store TV channelsSelect Favourite TV channels Select Reshuffle in the Installation menuGive name Reshuffle the programme listGeneral TV SetupSet/Change code Programme titleAuto Surround SubwooferDecoder Centre input Centre in volumeDemo SourcePicture menu TV menuSmart sound Active ControlSound AmbilightFeatures menu Display of a Nextview Nextview / Teletext guideCall Nextview / Teletext guide Additional consequencesTeletext Guide Nextview guidesPicture/NEXTVIEW Teletext guide Acquisition and updating of Nextview information Basic functionsTeletext Teletext menu Connect a eurocable 4 to your decoder and to Connect Peripheral EquipmentRecorder VCR-DVD+RW Decoder and RecorderCinema Link surround receiver Side connectionsMulti channel Surround receiver Connect extra subwooferRecorder or DVD with EasyLink Record with your recorder with EasyLinkConnect your computer To select connected equipmentAudio- and video equipment keys Tips See Extras, Specifications on this CD Check if the remote control is in the correct modeTo air and water pollution. Power consumption 2 W Check if you have selected the correct VGA mode in your PCPage Recorder DVD English Sound menu Activating CinemaLinkReceiver menu Speakers menu Surround menuSee the Instructions for Use of the TV or receiver box Automatic installationManual installation Give name ReshuffleEurope