Philips 42HFL5850D manual Video adjustment, Set energy saving

	will be marked as 'SKIPPED' at auto		•	NO_RGB
	installation.			Disallow RGB insertion in any sources.
•	STEP TUNING		•	NO
	Select YES to enable tuning for each digit			Allow RGB insertion in AV1 (EXT1)
	entry.			only.
•	DIGIT TIMEOUT
		6.14		Video adjustment
	Select 1 to 9.9 seconds for a channel
	to switch to another channel.The	1.	Enter SETUP menu.
	recommended and default setting is 3.0
	seconds.	2.	Press ï to select CONFIGURATION >

•	3 DIGIT TUNING		VIDEO ADJUSTMENT.
	Select YES to enable tuning up to 3-digit
	channels.		VIDEO ADJUSTMENT
•	AUTO SCART
			HORIZONTAL	< >
	Select AVI (EXT1), AV2 (EXT2), ALL,		VERTICAL	< >
	POWER SCART or NO.		PHASE	< >
	•	AV1	CLOCK	< >
			AUTO ADJUST	>
		Select the AV1 channel when a	RESET	>
		scart cable is connected to the AV1
		connector.
	•	AV2
		Select the AV2 channel when a

scart cable is connected to the AV2	3.	Press ï to select setting and Í Æ or Æ to
connector.		select options.
• ALL
	6.15 Set energy saving
Select the respective channel when
a scart cable is connected to an AV	1.	Enter SETUP menu.
connector.

	•	POWER SCART	2. Press ï to select CONFIGURATION >
			ENERGY SAVING.
		Switch on the TV from standby mode
		automatically when a scart signal is
		detected. Switch the TV to standby	ENERGY SAVING
		mode automatically in the absence of a
			LOW POWER STANDBY	FAST
		scart signal.
			ESP	1
	•	NO	SMART POWER	LOW
		Disable AUTO SCART feature.
•	ALWAYS RGB
	Select AUTO, AV1, NO_RGB or NO.
	•	AUTO
		Allow RGB insertion in any sources.

• AV1	3. Press ï to select setting and Æ to select
Allow RGB insertion in AV1 (EXT1)
	options.
and other sources.

EN-21

EN