7 Clone configuration
7.1From USB to TV
Copy TV configuration data from a USB stick to TV.
1.Insert the USB stick to the USB connector at the side of the TV.
2.Enter Setup menu.
3.Press ï to select SETUP > CLONING/ UPGRADE > CLONING > USB TO TV.
4.Press Æ to enter USB TO TV.
5.Press Æ to load data to the TV.
| CLONING |
USB TO TV | > |
TV TO USB | > |
3.Press ï to select SETUP > CLONING/ UPGRADE > CLONING > TV TO USB.
4.Press Æ to enter TV TO USB.
5.Press Æ to load data to the USB stick.
| CLONING |
USB TO TV | > |
TV TO USB | > |
DDNote
•During the process of copying, do not remove the USB stick.
•All remote control command and control buttons on the TV are disabled.
6.Switch off and then on to reset the TV after cloning.
EN
DDNote
•During the process of copying, do not remove the USB stick.
•All remote control command and control buttons on the TV are disabled.
6.Switch off and then on to reset the TV after cloning.
7.2From TV to USB
Copy TV configuration data from TV to USB stick.
1.Insert the USB stick to the USB connector at the side of the TV.
2.Enter Setup menu.