TV Setup
TV | General Source | The Setup menu contains items that control the settings of the TV’s | ||
functions, features, services and peripherals you may have connected. | ||||
Setup |
|
| ||
|
|
| ||
Demo Install
The General menu allows you to change settings that will typically be accessed only occasionally.
The Source menu allows you to select a source.
General
General
Setup 
Menu background 
Smart surf 
PIP format 
Factory settings
OSD Programme title Teletext 2.5 Auto surround Subwoofer (Intelligent lights) Set/Change code Colour
PLL
This menu allows you to change various settings that are presumably adjusted less frequently than most other settings.
Press the i key on the remote control to get information about the selected menu item.
Menu background
Select Yes or No to turn the menu background on or off.
Smart surf
&Select Smart surf.
éWith the cursor left/right, select
•2 channels if you want the 0 key to toggle between the current and the previously selected channel,
•9 channels if you want the 0 key to summon a list of up to 9 channels which can be selected.
To add/remove a channel or source to the 9 channels list:
Tune to the channel or source you wish to add or remove. Press the 0 key and press the cursor right to add or remove. Note: If there are already 9 channels/sources in the list, the one at the bottom of the list will be removed.
PIP format
This menu allows you to select the preferred format which can then be displayed toggling the b key on and off.
&Select PIP format with the cursor down.
éPress the cursor right.
“Select Dual screen, PIP, PIP 3 or PIP 6 with the cursor down. When Dual screen mode is activated with the remote control b key, and when
•Dual screen is selected, the TV splits the screen into two equally sized screens.
•PIP is selected, the TV shows a full screen of video with a pip window of video on top if it;
•PIP3 or PIP6 is selected, the TV will display the main screen together with 3 or 6 pip screens. See also p. 14.
Factory settings
This resets the picture and sound settings to their predefined factory values, but maintains the channel installation settings.
8