Philips 550W manual Record with your recorder, Side connections, To select connected peripherals

Page 22

Side connections

 

AUDIO

2

VIDEO

S•VID

EO

 

1

3

Camera, Game or Camcorder

&Connect your camera, game or camcorder as shown.

éConnect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect

AUDIO R 3.

S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEOinput 1 and AUDIO inputs 3.

Do not connect cable 1 and 2 at the same time. This may cause picture distortion !

Headphone

&Insert the plug into the headphone socket L as shown.

éPress ¬ on the remote control to switch off the internal loudspeakers of the TV.

The headphone impedance must be between 8 and

4000 Ohm. The headphone socket has a 3.5 mm jack.

In the Sound menu select Headphone volume to adjust the headphone volume.

To select connected peripherals

B

vAMP DVD/R TV SAT AUX

v Select

Ò ‡ π

®

º

æb

&Press the v key repeatedly or select Source in the Setup menu (see p. 10) to select AV1, AV2, HDMI (AV3), Side or TV channels, according to where you connected your devices.

éPress the cursor up/down.

Press OK.

Remark: Most equipment (decoder, recorder) carries out the switching itself. This is however never the case with a computer connected to the HDMI input.

Record with your recorder

Record a TV programme

You can record a TV programme using your recorders tuner without affecting your TV.

&Select the channel number on your recorder.

éSet your recorder to record.

See the handbook for your recorder.

Switching channel numbers on your TV does not disturb recording !

Record a programme from MONITOR OUT

You can record a programme on your recorder from the TV tuner via MONITOR OUT.

&Switch on the device.

éSelect the channel or wanted device on your TV and the correct input on your recorder.

Set your recorder to record.

You record the tuner channel of the TV or selected device.

Do not switch channels or turn off your TV when you are recording through MONITOR OUT.

20

Image 22
Contents Page Page Contents Preparation Keys on top or on the right side of the TVUse of the remote control RC4302 Smart surf On Screen informationMenu info Active control see p Picture formatProceed with the Install menu InstallationInstallation menu contains the following items To use the menusStore TV channels Automatic installationManual installation Give nameReshuffle the channel list Select Reshuffle in the Installation menuSelect Favourite TV channels TV Setup GeneralTeletext OSD On Screen DisplayProgramme title Auto SurroundCentre input DemoSource Can only be activated separatelyTV menu Picture menuSound Press the OK key to switch off the DemoActive Control AmbilightFeatures menu Scan PIP3 or PIP Dual screen / PIP / MultipipDisplay options Define the position and the size of the single PIP screenTeletext Teletext menu Recorder and other A/V devices Connect Accessory DevicesRecorder VCR-DVD+RW If your recorder has an S-VHS video jackDVD Player or other accessory digital source devices Multi channel Surround receiverAudio cables Hdmi High Definition Multimedia Interface connectorConnect extra subwoofer 1280 x 720p not with 42PF9966Side connections Record with your recorderTo select connected peripherals Audio- and video equipment keys Tips Reduce contrast and brightness when viewing Page