Source
Source
Setup
AV1
AV2
HDMI
Side Centre input
This menu allows you to indicate the peripheral you connected to one of the external inputs.
&Press the cursor right to enter the list of types of peripherals attached to the selected input.
éSelect the peripheral device with the cursor up/down.
Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 3, and when you press the v key on the remote control.
Centre input
When you have connected a surround receiver to the TV, see p. 19, the loudspeakers of the TV can act as centre speaker, making a separate centre speaker unnecessary.
Select Centre input On.
Demo |
| The Demo menu allows to demonstrate the TV features | ||
|
|
|
| separately or in a continuous loop. |
TV |
|
| Toggling through all the Ambilight modes will display each mode | |
Setup |
|
| for 10 seconds each. Before switching to the next mode the | |
Demo |
|
| Auto demo | light will first fade to off and then fade up in the next mode. |
Install |
|
| ...... | If Auto demo has been selected the demo will automatically |
|
|
| ||
|
|
|
| |
|
|
|
| present the features sequentially in a loop. Press one of the |
|
|
|
| cursor keys to stop the Auto demo. |
|
|
| Dealer demo | If one of the features has been selected, this particular feature |
|
|
| ||
|
|
| - Digital options | demo will run only once, and the Demo menu will reappear. |
|
|
| - Light sensor | Ambient light (Ambilight) demo however will run continuously |
|
|
| - 3D Y/C Comb filter | until it is stopped by pressing one of the cursor keys or the OK |
|
|
|
| key on the remote control. |
|
|
|
| Note: The Dealer demo is not part of the automatic sequence and |
|
|
|
| can only be activated separately. |
10