Philips FTR 9965/12 Activating CinemaLink, Receiver menu, Smart Sound,Treble, Bass, Loudness

Page 30

Activating CinemaLink

Continue to press the Ì-key on the remote control for more than 4 seconds.

&The TV or receiver box sends a play command to the Cinema Link DVD player, if present.

éThe DVD player will start playing and the audio receiver automatically switches to the best Cinema Link sound.

“If no DVD player is connected or if the DVD player has no disc loaded, the command can not be executed.

‘The TV or receiver box will then send a play command to the Cinema Link video recorder, if present.

(The video recorder will start playing and the audio receiver selects the best Cinema Link sound.

§If no video recorder source is connected or tape is loaded, the TV or receiver box will select the last watched TV channel.

Receiver menu

	TV	Sound	Surround	Speakers Automatic	Manual Give name Reshuffle
	DVD	Sound	Surround	Speakers Automatic	Manual Give name Reshuffle
	DVD			installation	installation
	Recorder			installation	installation
	Recorder
	Receiver
	Setup
	Demo
	Install

Note: When Cinema Link is enabled, certain items of the Sound menu (see TV menu) are steered by the audio receiver instead of by the TV or receiver box.

&Press the MENU key on the remote control.

éPress the cursor down to select Receiver.

“Press the cursor right to enter the Receiver menu items.

‘Press the cursor up/down to select the submenu items.

Note: the audio receiver submenu items may only be selected if provided by the audio receiver (dependent on the configuration setup and the sound signals transmitted).

Sound menu

Dependent on the audio receiver speakers configuration, you may not be able to select certain menu items.

Sound

Receiver Smart Sound Treble Bass Loudness 3D effect

Night mode Audio Only

Smart Sound,Treble, Bass

See the Instructions for Use for the TV or receiver box.

Loudness

When Loudness On is selected and when listening at low volume, the low and high frequencies are amplified so that the natural balance is restored.

3D effect

3D effect enables you to experience the effect of Dolby Surround Pro Logic without the need of having rear speakers connected or activated.

Select the level of 3D effect with the cursor left/right.

2

Image 30

Contents Flatl TV Cable Contents Preparation Use of the remote control RC4301 Keys in front of the TV receiver box Active control see p Picture formatMenu key to confirm your selection To use the menus InstallationInstallation menu contains the following items Select the menu language and countryStore TV channels Automatic installationManual installation Select your choice with the cursor rightSelect Favourite TV channels Give nameReshuffle the programme list You can change the order of the stored TVTV Setup GeneralSource Decoder TV menuPicture menu Active Control Features menu Sound menuSelect subtitles SleeptimerOn timer Child lockScan PIP 3, PIP 8 or PIP Dual screen / PIP / MultipipDisplay options Define the position of the single PIP screenPicture/NEXTVIEW Teletext Guide Nextview / Teletext guideCall Nextview / Teletext guide Nextview guidesTeletext Guide Basic functionsAcquisition and updating of Nextview information Select a Teletext Switch Teletext on and offTeletext Previously selected teletextTeletext menu Recorder VCR-DVD+RW With Component Video Output Connectors ExternalConnect Peripheral Equipment DVD playerCamera or Camcorder Side connectionsMulti channel Surround receiver HeadphoneVGA menu Recorder or DVD with EasyLinkSelect one of the menus with the cursor left/right Selecting submodes for DVD+RW, SAT, CDR To switch to standby For pause VCR, DVD, CD For recordAudio- and video equipment keys Record with your recorder with EasyLinkTips Displayed time is wrongWeight excl. packaging 4 kg Ambient temperature + 5~ + 40CPower consumption around 300 W Dimensions wxhxd Receiver 43.5 x 10.5 x 33 cmPage RecorderDVD English Smart Sound,Treble, Bass Activating CinemaLinkReceiver menu LoudnessSurround menu Speakers menuGive name Reshuffle Automatic installationManual installation See the Instructions for Use of the TV or receiver boxFlatl TV VGA Unpacking and wall mounting instructions Monitor Display modes OperationUse of the remote control Picture 1 menu Colour temperatureUse of the menus and the menu system Picture 2 menuSetup menu Sound menuCare of the screen Ambient temperaturePlasma Display characteristics Control of peripheral equipmentPage 3122 126

Related manuals

Manual 44 pages 25.05 Kb