Philips FTR9955/12 manual Video recorder and other peripherals, Camera & camcorder, DVD Player

Page 26

	≈	EXTERNAL
CABLE	≈	1 2

1

4

5

Video recorder and other peripherals

&Connect the aerial cables 1, 2 and 3 as shown opposite. Better

picture quality can be obtained if you also connect eurocable 5 to EXTERNAL 2 and a eurocable 4 to EXTERNAL 1, 3 or 4.

é Look for the test signal of your peripheral in the same way as you do for a

video recorder.

When a video recorder is connected to EXTERNAL 1 you can only record a

programme from your TV tuner.

Only when a video recorder is connected to EXTERNAL 2 it is possible to record a

programme from your TV as well as from other connected equipment. See Record

2

3

with your video recorder, p. 30.

Note: EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS,Y/C and RGB, EXTERNAL 3 and 4 only CVBS, EXTERNAL 5 YUV.

VCR 1

	AUDIO		IN
	AUDIO		S•VHS
L	R	VIDEO	S•VHS

1 2 3

Camera & camcorder

&Connect your camera or camcorder to the FRONT input behind the door at the front side of your receiver. Press the centre of the door to open.

éConnect the equipment to VIDEO IN 2 and AUDIO L 1 for mono equipment.

“For stereo equipment also connect AUDIO R 1.

S-VHS quality with an S-VHS, Hi-8 or Digital camcorder is obtained by

connecting the S-VHS cables with the S-VHSinput 3 (instead of VIDEO IN 2) and AUDIO inputs 1.

EXTERNAL 5

1	Y
1	Pb	L
	Pr	R

OUT

DVD Player

With euroconnector

Connect your DVD player with a eurocable to one of the euroconnectors EXTERNAL 1 or 2.

With Component Video Output Connectors (EXTERNAL 5)

&Connect the three separate component video cables to the DVD player’s Y, U (Pb) and V (Pr) jacks and to the Y, Pb and Pr jacks on the receiver.

éConnect the audio cable to the DVD player’s audio L and R jacks and to the L and R audio EXTERNAL 5 jacks on the receiver.

DVD

Connect Peripheral Equipment 25

Image 26

Contents Cable Contents Installation Your remote controlTV receiver box with speakerless monitor PreparationPreparation Pipes, balls and a puck To use the menus and the menu systemMenu system Direct selection and controlSelect the menu language InstallationAutomatic installation Select the countryReshuffle the programme list Manual installationGive name Select Favourite TV channelsSelect TV setup GeneralProgramme title Factory settingsOSD On Screen Display Set/Change codeDecoder Centre modeSource Teletext levelUse of the remote control Use of the remote controlPicture format Surround mode on/offInstant record Swapping screens in Dual screen or PIP FTR 9964 onlySmart keys Keys in front of the TV receiver boxActive Control SoundUse of the menus Picture menuSound menu Night mode Headphone volumeSurround mode Audio onlyProgramme list Features menuSleeptimer Select subtitlesPress the OK key to activate On timer§ Press the cursor right once again to enter the time Press the Menu Ï key to turn off the menuDual screen/PIP Dual screen/PIP FTR 9964 onlyMultipip Teletext Guide Teletext GuideTeletext Select subpages Select Continuous Subtitles Special teletext functionsHypertext Video recorder Search for and store the test signal of the video recorderConnect Peripheral Equipment Philips Cinema CombinationVideo recorder and other peripherals With euroconnectorWith Component Video Output Connectors External Camera & camcorderMulti channel Surround receiver Select Centre mode On in the Setup, General menu. See pHeadphone Connect your computerVGA menu Picture Sound SetupTo select connected equipment Equipment connected with an aerial cable onlyAudio and video equipment keys Remote Control functions for peripheralsVideo recorder with EasyLink Video recorder without EasyLinkPress one of the TV keys after you have pressed the SAT key DVD keysSatellite receiver Tuner, CD,Tape and CDR keysRecord TwiceIndex Tips & IndexTips Glossary GlossaryPage RecorderDVD Preparation and Operation Configuration of the Cinema Link peripheralsRecommended Activating CinemaLink Surround menu Give name Reshuffle