Philips FTR9955/12 manual Tips & Index

Page 32

Tips

Poor Picture

Have you selected the correct TV system?

Is your monitor or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc.?

Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.

Check if you have entered the correct frequency. See Installation, p. 6.

Are brightness and contrast out of adjustment? Select Factory settings in the Setup, General menu, p. 8 or press the SMART a key repeatedly.

No picture or no sound

Are the supplied cables connected properly? (The aerial cable to the TV receiver box, the other aerial to your VCR, the VGA cables to the display, the power cables.)

Has the childlock (p. 16) been switched off?

Is your PC switched on?

Has the Centre mode been switched off?

Do you see a black screen and the indicator in front of the monitor lights up green, this means that the display mode is not supported. Switch your VGA-source to a correct mode.

In case of weak or bad signal, consult your dealer.

Remote control

If your monitor no longer responds to the remote control, the batteries may be exhausted.

You can still use the MENU keys at the front of your receiver.

Menu

Have you selected the wrong menu? Press the same key again to exit from the menu.

Control of peripheral equipment The infrared signals of the screen may influence the reception sensibility of other peripherals.

Solution: replace the batteries of the remote control or change position of other equipment. E.g. keep away a wireless headphone from within a radius of 1.5 m.

TV-Guide - Displayed time is wrong The broadcaster on programme number one does not transmit the correct local date and time. Use Reshuffle in the INSTALLATION menu to place another broadcaster on programme number one.

No stable or not synchronised VGA picture

Check if you have selected the correct VGA mode in your PC. See the separate instruction manual with the monitor.

If your problem is not solved:

Switch both your monitor and your receiver off and then on again.

Never attempt to repair a defective monitor or receiver yourself.

Check with your dealer or call a TV technician.

End of life directives

We are paying a lot of attention to using environmentally-friendly production methods.Your new flat colour television contains materials which can be recycled and reused.

At the end of life specialised companies can dismantle the discarded flat colour television to concentrate the reusable materials and to minimise the amount of materials to be disposed of.

Please ensure you dispose of your old flat colour television according to local regulations.

How to dispose of exhausted batteries?

The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries exhausted batteries may not be disposed of with your household waste. Please ensure you dispose of exhausted batteries according to local regulations.

TV receiver box with speakerless monitor

In case you connect your TV receiver box with a speakerless monitor, and without having connected an audio receiver, all references made in this instruction book to sound reproduction, volume control, and audio connections, are not applicable (except for a headphone connection).

The keys on the remote control referring to sound have no function either.

Miscellaneous

. Ambient temperature: + 5~ + 40°C

. Mains: 50/60 Hz Auto Voltage ranging from 95 V to 264 V

. Power consumption: around 35 W

. Standby consumption: 2 W

. Weight (excl. packaging): 4 kg

. Dimensions (wxhxd): Receiver: 43.5 x 10.5 x 33 cm

Index

a

active control, 12

 

 

g

frequency,

6

 

 

smart keys,

12

 

 

 

auto format, 11

 

 

give name,

6

 

 

smart surf,

11

 

 

 

c

automatic installation,

6

h

headphone,

26

 

 

sound adjustments,

14

camcorder, 25

 

 

i

hypertext,

 

23

 

 

source,

9

 

 

 

 

 

centre mode, 9

 

 

info on screen,

10

 

stereo,

11

 

 

 

 

 

child lock, 16

 

 

l

interrupt the sound, 10

 

store TV channels,

5

 

code, 16

 

 

 

language,

5

 

 

 

subpages teletext,

22

 

connect your computer, 26

m manual installation, 6

 

subtitles, 16

 

 

 

 

continuous subtitles,

23

 

menu language,

5

 

S-VHS,

30

 

 

 

 

d

country,

5

 

 

 

menu-system, 4

 

surround mode,

11

decoder,

9

 

 

o

multipip, 19

 

 

t

switch TV on,

3

 

 

 

digital natural motion,

13

on timer,

17

 

teletext, 21

 

 

 

 

DNR, 13

 

 

p

peripheral equipment, 24

 

teletext guide,

20

 

 

dual screen/PIP, 18

 

 

 

picture adjustments, 13

 

time display,

11

 

 

 

dual screen format,

7

 

 

picture format, 11

v

tint, 13

 

 

 

 

 

 

dvd keys,

29

 

 

r

programme list,

16

VGA menu,

27

 

 

e

dynamic contrast, 13

 

recording,

30

 

 

video recorder,

24

 

eurocable, 24

 

 

 

reshuffle,

6

 

 

volume,

10

 

 

 

 

f

factory settings, 8

 

 

s

set/change code, 8

 

 

 

 

 

 

 

 

favourite tv channels,

6

 

setup, 7

 

 

 

 

 

 

 

 

 

 

 

freeze format, 10

 

 

 

sleeptimer,

16

 

 

 

 

 

 

 

 

Tips & Index 31

Image 32
Contents Cable Contents Installation Your remote controlTV receiver box with speakerless monitor PreparationPreparation To use the menus and the menu system Menu systemPipes, balls and a puck Direct selection and controlInstallation Automatic installationSelect the menu language Select the countryManual installation Give nameReshuffle the programme list Select Favourite TV channelsSelect TV setup GeneralFactory settings OSD On Screen DisplayProgramme title Set/Change codeCentre mode SourceDecoder Teletext levelUse of the remote control Use of the remote controlSurround mode on/off Instant recordPicture format Swapping screens in Dual screen or PIP FTR 9964 onlyKeys in front of the TV receiver box Active ControlSmart keys SoundUse of the menus Picture menuSound menu Headphone volume Surround modeNight mode Audio onlyFeatures menu SleeptimerProgramme list Select subtitlesOn timer § Press the cursor right once again to enter the timePress the OK key to activate Press the Menu Ï key to turn off the menuDual screen/PIP Dual screen/PIP FTR 9964 onlyMultipip Teletext Guide Teletext GuideTeletext Select subpages Select Continuous Subtitles Special teletext functionsHypertext Search for and store the test signal of the video recorder Connect Peripheral EquipmentVideo recorder Philips Cinema CombinationWith euroconnector With Component Video Output Connectors ExternalVideo recorder and other peripherals Camera & camcorderSelect Centre mode On in the Setup, General menu. See p HeadphoneMulti channel Surround receiver Connect your computerPicture Sound Setup To select connected equipmentVGA menu Equipment connected with an aerial cable onlyRemote Control functions for peripherals Video recorder with EasyLinkAudio and video equipment keys Video recorder without EasyLinkDVD keys Satellite receiverPress one of the TV keys after you have pressed the SAT key Tuner, CD,Tape and CDR keysRecord TwiceIndex Tips & IndexTips Glossary GlossaryPage RecorderDVD Preparation and Operation Configuration of the Cinema Link peripheralsRecommended Activating CinemaLink Surround menu Give name Reshuffle