General
Setup 
Teletext level 2.5 
On / Off
General
Setup 
Centre mode | On / Off |
Source
Setup 
EXT1 
EXT2 
EXT3 
EXT4 
EXT5 
Front 
Teletext level 2.5
Some broadcasters offer the opportunity to see more colours, other background colours and nicer pictures in the teletext pages.
&Select Teletext level 2.5 with the cursor down.
éPress the cursor right to select Teletext level 2.5 On to take advantage of this feature.
“Press the cursor right again to select Teletext level 2.5 Off if you like the more neutral teletext layout.
The selection made is valid for all channels which broadcast teletext.
Note: It may take a few seconds before teletext broadcast switches over to Teletext level 2.5.
Centre mode
When you have connected a multi channel audio receiver to the receiver box (see Connect peripheral equipment, p. 26) and you have selected Centre mode On, the loudspeakers of the monitor will act as centre speaker, making a separate centre speaker unnecessary.
Source
This menu allows you to select the peripheral you connected to one of the external inputs.
&Select Source with the cursor right.
éPress the cursor down to select one of the external inputs.
“Press the cursor right to enter the list of types of peripherals attached to the selected input.
‘Select the peripheral device with the cursor up/down.
Once you have selected the source, e.g.VCR, this source will automatically be selected when your remote control is in VCR mode, see p. 10, and you press the w key on the remote control.
Decoder
If a decoder or a descrambler is connected, see p. 24, you can define one or more programme numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme with the cursor down.
“Select the programme number under which you have stored the programme coming from your decoder.
‘Select Status.
•Select the input used to connect your decoder: None, EXT1, EXT2.
•Select None if you do not want the selected programme number being activated as a decoder programme number.