Philips BDL5231V user manual Information for UK only

Page 7

User Manual BDL5231V/00

INFORMATION FOR UK ONLY

WARNING - THIS APPLIANCE MUST BE EARTHED.

Important:

This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:

1.Remove fuse cover and fuse.

2.Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type.

3.Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance with the following code:

BLUE - “NEUTRAL” (“N”)

BROWN - “LIVE” (“L”)

GREEN & YELLOW - “EARTH” (“E”)

1.The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter “E” or by the Earth symbol or coloured GREEN or GREEN AND YELLOW.

2.The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

3.The BROWN wire must be connected to the terminal which marked with the letter “L” or coloured RED.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the three wires.

4

Image 7

Contents Public Signage Solutions Table of Contents Page Safety Instructions Regulatory Information CE Declaration of Conformity Polish Center for Testing and Certification Notice Information for UK only 环保使用期限 North Europe Nordic Countries Information Contents Control Panel Connection & Button OverviewsExternal Speaker Terminal Terminal PanelPower button Remote ControlHandling the remote control Operating Range for the Remote ControlWay 1 Attach and remove the optional stands How to Mount or Attach Feet to the LCD MonitorTo avoid monitor from falling Way II Mount the monitor on the wallVentilation Requirements for enclosure locating Setup Procedure Recommended Adjustment Adjust the imageTo prevent the main power switch from being changed How to set-up Install the LCD Monitor in Portrait ModeConnectivity Connectivity DiagramBefore making connections Connecting the LCD Monitor to a Personal Computer Connecting to a Personal ComputerConnect the LCD Monitor to a Computer with a Digital Output Connecting to a Digital Interface EquipmentConnect the LCD Monitor to a DVD Player Connecting to a DVD PlayerConnecting to a mount PC Connecting to a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier Using the remote control Power on and OFF ModesPressing the Main Power Switch Pressing the power buttonPicture Size Power IndicatorUsing Power Management Display Signal of Video Source Setting to VideoOSD Information Smart Picture ModeAudio Source Switching Control Lock ModeOSD On-Screen-Display Controls Black Level BrightnessContrast SharpnessLight Sensor Color TemperaturePicture Reset Color ControlPosition Zoom ModeCustom Zoom Screen ResetBass Speaker Audio ResetBalance TreblePIP Size PIP ResetPIP Audio Language Power SavePanel Saving Factory Reset Configuration ResetOSD H Position Sleep TimerOSD Turn OFF Information OSDMonitor Information Gamma Selection Advanced OptionDate and Time IR ControlKeyboard Control TilingMonitor ID Smart PowerAdvanced Option Reset ScheduleImage Sticking of LCD Panel For long life use of Public DisplayRecommendations B a B a Remote control numbering functionFull HD LCD display 1920x1080p FeaturesTroubleshooting No Sound Remote Control is not availableSCHEDULE/SLEEP Timer function is not working properly No Signal is displayed on the screenSpecifications BDL5231V SpecificationsSDA Pin AssignmentSpecifications are subject to change without notice