Philips 14PT1686/01P manual Tips

Page 12

Tips

Poor reception

The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your picture: see Fine Tuning (p.5) or modify the orientation of the outside aerial.

Does your antenna enable you to receive broadcasts in this frequency range (UHF or VHF band)?

In the event of difficult reception (snowy picture) switch the NR on the Options menu to ON. (p. 6).

No picture

If the television does not switch on, please press the standby key b (located on the remote control) twice.

Have you connected the aerial socket properly?

Have you chosen the right system? (p. 5). Poorly connected euroconnector cables or aerial sockets are often the cause of picture or sound problems (sometimes the connectors can become half disconnected if the TV set is moved or turned). Check all connections.

Peripheral equipment gives a black and white picture

To play a video cassette, check that it has been recorded under the same standard (PAL, SECAM, NTSC) which can be replayed by the video recorder.

The remote control no longer works. Check that the mode selector on the side of the remote control is set to TV.

No sound

If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. Modify the System setting (p. 5).

Teletext

Are certain characters not displayed correctly? Check that the Country setting has been positioned correctly (p.5).

Remote control

The TV set does not react to the remote control; the indicator on the set no longer flashes when you use the remote control? Replace the batteries.

Standby

When you switch the TV set on it remains in standby mode and the indication Locked is displayed when you use the keys on the TV set? The Child Lock function is switched On (p. 7). If the set receives no signal for 15 mins, it automatically goes into standby mode.

To save power, your set is fitted with components that give it a very low power consumption when in standby mode (less than 3 W).

Still no results?

If your TV set breaks down, never attempt to repair it yourself: contact your dealer's after- sales service.

Cleaning the set

Only use a clean, soft and lint-free cloth to clean the screen and the casing of your set. Do not use alcohol-based or solvent-based products.

10

Image 12
Contents Page Page Table of Contents IntroductionInstalling your television set Positioning the television set Remote control‘ Switching on Keys on the TV setRemote control keys RecyclingQuick installation Program sortProgram name NameOther settings in the Install menu Manual storePicture settings Sound adjustmentsFeature settings Description of the adjustmentsTimer Child lockParental control Parental Cont. Use the îÏkeys toTeletext Press You will obtainConnecting peripheral equipment Video recorderOther equipment To select connected equipmentTips RGB Signals GlossarySystem 169Connecting the aerial Positioning the TVGeneral Points InterferenceTable of TV frequencies EuropeL01 3111 256