Manual store
This menu is used to store the programmes one at a time.
&Press the Hkey.
éWith the cursor, select the Install menu then Manual store:
Mainge |
| Manual Store |
|
• Picture |
|
| |
|
|
|
|
• Sound |
| $ System | Europe Æ |
• Features |
| • Search |
|
$Install |
|
| |
|
|
|
•Program No.
•Fine Tune
•Store
“System: select Europe (automatic detection*) or Western Europe (BG standard), Eastern Europe (DK standard), United Kingdom (I standard) or France (LL’ standard).
*Except for France (LL’ standard), you must select choice France.
‘Search: press ¬.The search starts. Once a programme is found, the scanning stops and its name is displayed (when available). Go to the next step. If you know the frequency of the
required programme, this can be entered directly using the 0to 9keys.
If no picture is found, consult the possible solutions (p. 10).
(Program No.: enter the required number
with the Ȭor 0to 9keys.
§Fine Tune: if the reception is not satisfactory,
adjust using the Ȭkeys.
èStore: press ¬.The program is stored. ! Repeat steps ‘to !for each programme to
store.
ç To quit the menus, press d.
Other settings in the Install menu
&Press the Hkey and select the Install menu: é Language: to change the display language for
the menus.
“ Country: to select your country (GB for Great Britain).
This setting is used for the search, automatic programme sort and teletext display. If your country does not appear in the list, select “. . .”
‘ Auto Store: to start automatic search for all programmes available in your region. If the transmitter or cable network sends the
automatic sort signal, the programmes will be numbered correctly. If this is not the case, you need to use the Sort menu to renumber the programmes (see p. 4).
Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the îÏ keys and validate with ¬.To quit or interrupt the search, press H. If no picture is found, consult the possible solutions (p. 10).
( To quit the menus, press d.
Using the radio (only available on certain versions)
Choice of TV or radio mode
Press the Âkey on the remote control to switch the TV set to either TV or radio mode. In radio mode, the number, station name
(if available) and frequency are displayed on the screen. To enter the station names, use the Name menu (p. 4)
Program selection
Use the 09or @P #keys to select the FM stations (from 1 to 40).
List of radio stations
Press the ıkey to display the list of radio stations radio. Use the îÏkeys to change station and the dkey to exit.
Using the radio menus
Use the Hkey to access the specific radio setting.
Search for radio stations
If you used the quick installation, all available FM stations have already been stored.To start a new search, use the Install :Auto Store menu (for a complete search) or Manual Store (for a station by station search).The Sort and Name menus let you sort or name the radio stations. Operation of these menus is the same as for the TV menus.
5