Quick installation
The first time you switch on the television, a menu appears on the screen and the tuning starts automatically.
Auto Store |
| |
• | Program | 2 |
• | TV | 470 MHz |
• ••••••••••••••••••••••••••••••••
If the menu is not displayed, press and hold down the ”- and ”+ keys on the TV set for 5 seconds to start the tuning.
All the available TV programs and radio stations
*will be stored. This operation takes a few minutes.The display shows the progress of the
search and the number of programs found.
At the end of the search, the menu disappears. To exit or interrupt the search, press H.
If no program is found, consult the possible solutions
p. 12.
&If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.
éIf this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In this case, indicate your choice using the îÏ
keys and validate with ¬.
* Only on versions equipped with a radio.
Program sort
&Press key H.The Main menu is displayed on the screen.
Mainge |
|
|
|
|
|
| ||
• Picture |
| Install |
| 00 |
| |||
• Sound |
| • Language |
|
| ||||
• Features |
|
|
| |||||
| • Country |
| 01 | TF1 | ||||
$Install |
|
| ||||||
|
|
|
| • Auto Store |
| 02 | FR2 | |
|
|
|
| • Manual Store |
|
| 03 ÆFR3 | |
|
|
|
|
|
|
| ||
|
|
|
| $ Sort | Æ | 04 | C + | |
|
|
|
| • Name |
| 05 | ARTE | |
|
|
|
|
| ||||
éWith the cursor, select the Install menu
followed by the Sort menu.
“Select the programme you want to move using
the îÏkeys and press ¬.
‘Then use the îÏkeys to select the new number and validate with È.
(Repeat steps “ and ‘ for each program you
wish to renumber.
§ To quit the menus, press d.
Program name
If required, you can give a name to the programmes and external connectors. Note: on installation, the programs are named automatically when an identification signal is sent.
&Press the Hkey.
éWith the cursor, select the Install menu, then
Name
“Use the îÏkeys to select the programme to name or rename.
‘Use the Ȭkeys to move around the name display area (5 characters) and the
îÏkeys to select the characters.
(When the name has been entered, use the
Èkey to exit.The name is stored.
§Repeat steps “ to ( for each programme you wish to name.
è To quit the menus, press d.
4