Philips DVDR3430V Channel or two separate mono channels, Activate the connected decoder, Skip

English

DVD Setup Menu Options (continued)

CHANNEL SETUP settings

Channel

Name

Scan mode

Frequency

TV System

NICAM

Audio

Decoder

Skip

Fine-tune

OK

P001/Ch003

Frequency

585.26MHz

PAL B/G

On

DUAL A

Off

No

CANCELOK

{NICAM } – NICAM is a digital sound transmission system. It can transmit either one stereo

channel or two separate mono channels.

{ On }	– Improve the sound transmission
	of the TV channel.
{ Off }	– Select this if the reception is poor
	and the sound is distorted.

{Audio } – For bilingual TV programmes, you can switch between stereo (original) and additional audio language.

{DUAL A } – Original broadcast language.

{DUAL B } – Additional audio language.

{Decoder } – If the current TV channel is transmitted by coded TV signals that can only be viewed properly with a decoder which is connected to the EXT2 AUX-I/O socket, you need to

activate the connected decoder.

	{ On }	– Select this to allocate the connected
		decoder to this TV channel.
	{ Off }	– Turn off the decoder feature.
{ Skip }	– Select this to set the channel to be skipped.
	{ No }	– The TV channel can be accessible
		using the P + − on the remote
		control.
	{ Yes }	– The TV channel can only be
		accessible by pressing the
		corresponding number button on
		the remote control.

Sort Channels

Sort Channels

P001	BC020	Skip
P002	SW006	Unskip
P003	CH008	Unskip	P003 CH008 Unskip
P004	CH004	Unskip
P005	CH006	Skip
P006	CH010	Unskip
P007	CH012	Unskip
P008	CH005	Unskip

{Fine-Tune} – Select this to fine-tune the TV channel manually if the reception is poor. Use W X keys to adjust the frequency and press OK to confirm.

Rearrange the stored TV channels.

1)Use ST keys to highlight { Sort Channels } and press OK to show a list of TV channel programmes.

2)Use ST keys to highlight the channel you want to change and press OK.

3)Use ST keys to shift the TV channel to the desired position and press OK again. The selected channel will be inserted before the current position.

Note: Press BACK2 on the remote control to go back to the previous menu.

58