Timer Recording (continued)
{Source }
Select the TV channel or the correct input source (EXT1, EXT2 or CAM1) which you have used to connect the external device.
{Dest. }
Select the recording destination, DVD or VCR.
{Rec Mode }
Select the mode of recording.
See the chapter “Recording – RECORD settings - Default Recording mode” for more information.
{Mode }
Select a desired repeat recording mode (Once, Daily, Weekly,
{Date }
Enter the date for recording (Day/Month/ Year).
{Start }
Enter the start time of recording (hours : minutes).
{End }
Enter the end time of recording (hours : minutes).
{VPS/PDC }
Turn on or off the VPS/PDC setting. Note: VPS/PDC setting is not available for external receiver.
E Use ST keys to select OK in the menu and press OK.
The system will store the timer entry and return to the timer schedule list.
To cancel the above timer setting, move to CANCEL in the menu and press OK.
F Press TIMER to exit the menu.
G Insert a recordable DVD or VHS tape into the recorder.
For VHS tape, locate the start point position for recording.
H Press
The ‘TIMER’ icon will light up on the display panel if a timer recording is set.
If the recorder is not in standby mode, a notification message will appear three minutes before the recording begins.
The recorder will automatically power off when the timer recording ends.
Helpful Hints:
–Set the timer recording one minute ahead of the programme’s start time. This helps ensure the entire programme is recorded as the disc requires about 30 seconds to prepare for recording.
–The interval time between two recording schedules is at least 5 (fi ve) minutes. Otherwise, the very beginning of the later programme may not be recorded.
–Only PAL/SECAM video signal is possible to record to a VHS tape on this recorder.
English
TIPS: Ensure that there is sufficient space available on the recordable DVD or VHS tape before recording. You have to finalise the DVD±R before it can be playback on other players.
31