Troubleshooting (continued)
Problem (Recording) | Solution |
|
|
English
The wrong TV channel was decoded (recorded) after you programmed a recording using the ShowView® / VIDEO Plus+ system.
1)Press SHOWVIEW (or VIDEO Plus+) on the remote control, enter the programming or Plus code number of the desired TV channel.
2)Press OK to confirm.
3)Check the channel number in the {Program #} input field. If this does not correspond to the desired TV channel, select this entry field and change the channel number.
4)Press OK to confirm.
Picture is fuzzy and brightness varies when copying DVD Video discs or prerecorded video tapes.
–This happens if you try to copy DVDs or video tapes that have been
–The DVD recordable disc has a limited recording lifetime, please change a new disc for recording.
Recordings are not occurring as scheduled. New recordings cannot be made.
–The TV channel you want to record is not stored or you selected the wrong programme number. Check TV channels stored.
–If you adjust the clock after you set a timer recording, you have to reset the timer recording.
–If the recorder cannot read the disc, you cannot record.
–You cannot use the recorder to duplicate copyrighted materials (DVDs or videotapes) onto a DVD±R/±RW.
–A finalised DVD±R has been inserted. Change disc.
A DVD±R/±RW recorded on this DVD recorder does not playback on a DVD player.
The picture on my decoder appears to be distorted during recording.
The VHS tape is ejected when you press REC button.
–If a recording is too short, it is possible that a DVD player cannot detect it.
–You have to finalise the DVD±R. Refer to chapter “Playing your recordings (DVD±R) on other DVD players” for details.
–If you are recording a programme from your decoder box, you can view the same programme by pressing the TV/VIDEO on the recorder’s remote control.
–If the safety tab has been removed, cover the tab hole with clear tape.
–Make sure the VHS tape is not at its end.
65