Setting Up your DVD/VCR
Setting the clock
| If the display shows an incorrect time or ' | ||
| date must be reset manually. |
| |
| If a TV channel that transmits TXT/PDC (teletext/PDC) is | ||
| stored under programme number 'P01', time/date will automat- | ||
| ically be taken from the TXT/PDC information. (SMART | ||
1 | CLOCK) |
| |
Press VCR, then DISC/VCR MENU. |
| ||
2 | Press K/L to select 'INITIAL SET UP' , then press B. | ||
3 | Press K/L to select 'CLOCK' , then press B. | ||
4 | Check the time in 'TIME'. If |
| |
| required, please change the time | TIME | |
| with numerical key pads. | ||
5 |
| ||
Check 'DAY', 'MONTH' and 'YEAR' | DATE | ||
6 | in the same way. | SMART CLOCK [ON] | |
Choose ‘SMART CLOCK’ ON or | |||
| |||
7 | OFF with B. | END=EXIT | |
To end, press STATUS/EXIT. | |||
Setting the RF out channel
In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the DVD/VCR. Result: As soon as the DVD/VCR is switched on, the reception quality for this or several other TV channels will decrease.
The following steps will show you how to change the
1Press VCR, then DISC/VCR MENU.
2Press K/L to select 'INITIAL SET UP' , then press B.
What is RF out channel?
This electronic component in the DVD/VCR allows the device to transmit audio and video signals via the aerial cable.These signals can be received on a TV set just like TV channels.
What is RF out channel frequency?
This frequency or channel indicates the channel on which the audio or video signal is transmitted.
Decoder allocation
Some TV channels transmit encoded TV signals which can only be viewed with a purchased or rented decoder.You can con- nect such a decoder to this DVD/VCR.The following function will automatically activate the connected decoder for the desired TV channel.
1Switch the TV on. If applicable, select the programme number for the DVD/VCR operation.
2Press K/L or numerical key pads to select the TV channel which you would like to allocate the decoder to.
3Press DISC/VCR MENU.The main menu will appear.
4Press K/L to select 'TUNER SET UP'.Then press B.
5 | Press K/L to select 'MANUAL | MANUAL TUNING |
| |
6 | TUNING'.Then press B. | PROG. | P55 | |
Press K/L to select 'DECODER'. | ||||
CHANNEL | 055 | |||
7 | Press B to select 'ON' (Decoder | →DECODER | [OFF] | |
| switched on). | SKIP | [OFF] | |
|
|
|
SELECT K L CHOOSE B
END=EXIT
How can I switch off the decoder?
Use B to select 'OFF' (Decoder switched off).
8To end, press STATUS/EXIT.
The decoder has now been allocated to this TV channel.
English
3Press K/L to select 'RF OUT' , then press B.
4Press B.
5Press K/L or numerical key pads to select a free (not allocated) channel between channel 22 and 69 in your area.
6Press B.
7To end, press STATUS/EXIT.
SELECT K L CHOOSE B
→RF OUT CH 36
END=EXIT
If you cannot get an
Press L repeatedly until
Then confirm with B. In that case, please connect your VCR to your TV with a Scart cable.
9