Philips DVP 3055V Lock Parental Control, Rating DVD, Select Rating on the Lock menu then press

Select “Password” on the “LOCK” menu then press 2.

Before Operation (Continued) - DVD part

English

LOCK (Parental Control)

LOCK

Rating	Unlock
Password	New
Area Code	HU

Move Select

Rating DVD

Movies on DVDs may contain scenes not suitable for children.Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are

country dependent.The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.

1 Select “Rating” on the “LOCK” menu then press

2.

2 To access the Rating, Password and Area Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so.

Input a 4-digit code and press OK. Enter it again and press OK to verify. If you make a mistake before pressing OK, press CLEAR and enter 4-digit security password again.

3 Select a rating from 1 to 8 using 3/4 buttons. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.

Unlock: If you select Unlock, Parental Control is not active.The disc will play in full.

Note:

If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc.The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop.You must enter the 4-digit password or change the rating level in order to play the disc.

4 Press OK to confirm your rating selection, then press SYSTEM MENU to exit the menu.

Password (Security Code)

You can enter or change password.

1

2 Follow step 2 of “Rating” on left. “Change” or “New” is highlighted.

3 Enter the new 4-digit code, then press OK. Input it again to verify.

4 Press SYSTEM MENU to exit the menu.

If you forget your Security Code

If you forget your security code you can clear it using the following steps:

1 Press SYSTEM MENU to display the Setup menu.

2 Input the 6-digit number “210499” and the security code is cleared.

3 Enter a new code as described above.

Area Code DVD

Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country/Area Code List”, page 36).

1 Select “Area Code” on the “LOCK” menu then press 2.

2 Follow step 2 of “Rating” on left.

3 Select the first character using the 3/4 buttons.

4 Shift the cursor using 2 button and select the second character using 3/4 buttons.

5 Press OK to confirm your country code selection.

20