Programmed Playback CD MP3

English

Programmed Playback with Audio CD and MP3/Windows MediaTM Audio Disc

The Program function enables you to store your favorite tracks from any disc in the player memory.

Program can contain 30 tracks.

1 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode.

The E mark will appear to the right of the word “Program” on the right side of the menu screen.

Note

Press PROGRAM to exit the Program Edit mode; the E mark will disappear.

2 Select a track, then press OK to place the selected track on the Program list.

3 Repeat step 2 to place additional tracks on the Program list.

Audio CD menu	MP3/Windows MediaTM
	Audio menu

4 Press 2.

The programmed track you selected last is highlighted on the program list.

5 Use 3/4 to select the track you want to start playing.

6 Press PLAY B to start.

Playback begins in the order in which you programmed the tracks.

Playback stops after all of the tracks on the Program list have played once.

7 To resume normal playback from programmed playback, then select a track of AUDIO CD (or MUSIC) list and then press PLAY.

Repeat Programmed Tracks

●To repeat the track currently playing, press REPEAT.

The Repeat icon and “Track” appears on the menu screen.

●To repeat all tracks on the program list, press REPEAT a second time.

The Repeat icon and “All” appears on the menu screen.

●To cancel Repeat mode, press REPEAT a third time.

Note

If you press T once during Repeat Track playback, the repeat playback cancels.

Erasing a Track from Program List

1 Press PROGRAM in the stop mode to enter the Program Edit mode.

2 Press 2 to move to the Program list.

3 Use 3/4 to select the track that you wish to erase from the Program list.

4 Press CLEAR.

The track will be erased from the Program list.

Erasing the Complete Program List

1 Follow steps 1-2 of “Erasing a Track from Program List” as above.

2 Use 3/4 to select “Clear All”, then press OK.

The complete Program for the disc will be erased.

The programs are also cleared when the disc is removed.

Maintenance and Service

Refer to the information in this chapter before contacting a service technician.

Handling the Unit

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

•Do not use volatile liquids such as insecticide spray near the unit.

•Do not leave rubber or plastic products in contact with the unit for a long period of time since they leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished.

Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use.

For details, please contact your nearest authorized service center.