E9017FD_EN.qx3 03.8.6 10:13 AM Page 14
Programming a Recording (TIMER)
English
5The decoded data appears after confirmation.You can go back to change the data. Select the corresponding input field using B or CLEAR. Change the data with numerical key pads.
6When all inputs are correct, press DISPLAY/STATUS/EXIT.The programming information is stored in a Timer block.
Switching on 'VPS/PDC' in the 'START' input field Select 'VPS/PDC' using B or CLEAR. Press '1' to switch off 'VPS/PDC' or press '2' to switch on 'VPS/PDC'.
7Insert a cassette with an intact security tab (unprotected).
8Press TIMER SET.
'TIMER REC' will light up on the System.
How to check, or delete a programmed recording (TIMER)
1 | Press VCR, then DISC/VCR MENU. | SELECT K L CHOOSE B |
2 | Press K/L to select 'TIMER'.Then | ONCE |
| press B. | |
3 | DAILY | |
Press K/L to select 'TIMER LIST' , | WEEKLY | |
| then press B. | → TIMER LIST |
4 |
| |
Select timer block with B. |
| |
5 | To cancel the recording, press | END=EXIT |
| CLEAR. | |
|
|
6To end, press DISPLAY/STATUS/EXIT.
7Press TIMER SET.
Programming a recording (without the SHOWVIEW system)
1 | Press VCR, then DISC/VCR MENU. |
| |
2 | Select 'TIMER' with K/L.Then | SELECT K L CHOOSE B | |
| |||
| press B. | → ONCE | |
3 | Select ONCE, DAILY or WEEKLY | DAILY | |
WEEKLY | |||
| recording with K/L.Then press B. | ||
| TIMER LIST |
If all Timer blocks are in use,‘FULL’ will appear on the OSD.
4Select the desired Timer block with END=EXIT numerical key pads. (The flashing
number indicates an empty TIMER block.)
Selecting once/daily/weekly recordings Using K/L, select from the following options: 'ONCE': Recording once
'DAILY': Repeated daily recordings (Monday to Friday)
'WEEKLY': Repeated weekly recordings (every week on the same day)
5Enter the Start time (START) End time (STOP), Programme number (PROG.),VPS/PDC information and the Date with numerical key pads.
Programme numbers of the ' AV1 ' , ' AV2 ' and ' AV3' scart socket
You can also programme recordings from external sources via scart socket AV1(TV),AV2 (DECODER) or AV3(FRONT).
6When all inputs are correct, press DISPLAY/STATUS/EXIT.The programming information is stored in a TIMER block.
7Insert a cassette with an intact security tab (unprotected).
8Press TIMER SET.
OTR (One Touch Recording)
This function enables you to set a recording length simply by pressing RECORD on the System.
1Follow steps 1 to 2 in “Recording without automatic switch- off” section.
2Press RECORD on the System repeatedly until the desired recording length appears.
0:00 |
| 0:30 |
| 1:00... |
| 7:30 |
| 8:00 |
|
|
|
|
REC (Normal recording)
• Recording stops when 0:00 is reached.
To check time remaining during an OTR
Press DISPLAY/STATUS/EXIT.
To change the recording length during an OTR Press RECORD until the desired length appears.
To stop an OTR before recording is finished Press STOP C.
To cancel the OTR but continue recording
Press RECORD repeatedly until “REC” appears in the upper left corner of the TV screen.
How to change a programmed recording (TIMER)
1Press VCR, then DISC/VCR MENU.
2Press K/L to select 'TIMER' ,then press B.
3Press K/L to select ONCE, DAILY,
| or WEEKLY recording with K/L , | ONCE |
|
| |
4 | then press B. | TIMER - 1 2 3 4 5 6 7 8 - |
Select a TIMER block with numeri- |
| |
| cal key pads. (The flashing number |
|
5 | indicates an empty TIMER block.) |
|
Press CLEAR to delete information | SELECT TIMER NUMBER | |
| and input correct information with | END=EXIT |
numerical key pads.
6To end, press DISPLAY/STATUS/EXIT.
7Press TIMER SET.
Hints for Timer Recording
•If there is a power failure or the System is unplugged for more than 1 minute, the clock setting and all timer settings will be lost.
•If a tape ends during TIMER RECORDING, the System will stop, eject the tape, and switch to the DVD mode automati- cally as the TIMER REC light blinks. (If the DVD power is off, the System will become the STANDBY status).
•If a tape is not in the System or does not have a record tab, the TIMER REC light flashes and timer recording will not operate. Please insert a recordable tape.
•When timer recordings are set, the TIMER REC light will come on.To use the System as usual until the time for the recording, press TIMER SET so that the TIMER REC light dis- appears. Press the System to choose VCR, DVD or TUNER modes, then continue with the other features as described in this manual.
'PRESS TIMER SET BUTTON FOR TIMER RECORDING' appears on the screen
*Press TIMER SET on several minutes before the start of a pro- grammed recording.
Error message: 'FULL'
•If this error message appears after you select 'ONCE', 'DAILY', or 'WEEK- LY' on TIMER menu and press B, then all TIMER blocks are already pro- grammed. No more recordings can be programmed. If you want to clear or check a programmed recording (TIMER block),select the programme num- ber on TIMER LIST menu and press CLEAR.
14