E9017FD_EN.qx3 03.8.6 10:13 AM Page 10
Setting Up your System
English
Sorting and clearing TV channels manually
After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (pro- gramme numbers) of the System.You can use this function to individually sort the TV channels already saved or to delete unwanted TV channels or those with poor reception.
The clock resets automatically
If you save a TV channel that transmits TXT/PDC on programme number ‘P01’, date and time will constantly be updated. As a result, time changes, i.e. daylight savings time, will be set automatically.
1Press VCR, then DISC/VCR MENU. MOVE
2 Press K/L to select 'TUNER SET UP' , then press B.
3 Press K/L to select 'MOVE' , then press B.
4 Press K/L to select the saved TV SELECT K L CHOOSE B channel that you want to change. END=EXIT
5Confirm with B.
6Move the selected channel with K/L to the programme num- ber you want to assign.
7Confirm with B.
8To assign other TV channels to a programme number, repeat steps 4 to 7.
9Confirm the assignment of the TV channel with MOVE menu.
10To exit the MOVE menu, press DISPLAY/STATUS/EXIT.
Setting the language (for VCR features)
You have the option of setting one of the displayed languages for the
1Press VCR, then DISC/VCR MENU.
2 Press K/L to select 'INITIAL SET UP' , then press B.
3 Press K/L to select 'LANGUAGE', then press B.
4 Select the desired language with K/L.
5 To end, press
DISPLAY/STATUS/EXIT.
Setting the clock
If the display shows an incorrect time or '
If a TV channel that transmits TXT/PDC (teletext/PDC) is stored under programme number 'P01', time/date will automat- ically be taken from the TXT/PDC information. (SMART CLOCK)
1Press VCR, then DISC/VCR MENU.
2Press K/L to select 'INITIAL SET UP' , then press B.
3Press K/L to select 'CLOCK' , then press B.
4Check the time in 'TIME'. If
| required, please change the time | TIME | |
5 | with numerical key pads. | DATE | |
Check 'DAY', 'MONTH' and 'YEAR' | |||
| |||
6 | in the same way. | SMART CLOCK [ON] | |
Choose ‘SMART CLOCK’ ON or |
| ||
| OFF with B. | END=EXIT | |
|
|
7To end, press
DISPLAY/STATUS/EXIT.
Changing the video (colour) system (for VCR features)
If you playback recordings made on other video recorders or you want to record from external sources (via the scart sock- et), the automatic video (colour) system
Video (colour) systems
Other countries, other video (colour) systems:
In central Europe transmissions are broadcast in the PAL system (Phase Alternation Line) standard. France uses SECAM (Séquentiel
àmémoire). In some countries (USA and Japan),TV viewers receive their programmes as an NTSC signal (National Television System Committee).
1Press MODE/SYSTEM on the remote control to select the TV (colour) system with the least disruptions before you start recording or during playback.
Each pressing MODE/SYSTEM, the display will change cyclicaly; AUTO, PAL, SECAM,
AUTO
2After 5 seconds, the OSD will disappear.
How can I change back to 'Automatic
If you eject the cassette, the video (colour) system for playback will switch itself back to 'AUTO' (automatic switchover).
Decoder allocation (for VCR features)
Some TV channels transmit encoded TV signals which can only be viewed with a purchased or rented decoder.You can con- nect such a decoder to this System.The following function will automatically activate the connected decoder for the desired TV channel.
1Switch the TV on. If applicable, select the programme number for the System operation.
2Press K/L or numerical key pads to select the TV channel which you would like to allocate the decoder to.
3Press DISC/VCR MENU.The main menu will appear.
4Press K/L to select 'TUNER SET UP'.Then press B.
5 | Press K/L to select 'MANUAL | MANUAL TUNING |
| |
6 | TUNING'.Then press B. | SYSTEM | [ L ] | |
Press K/L to select 'DECODER'. | ||||
PROG. | P55 | |||
7 | Press B to select 'ON' (Decoder | CHANNEL | 055 | |
| switched on). | → DECODER | [OFF] | |
| SKIP | [OFF] | ||
|
|
SELECT K L CHOOSE B
END=EXIT
How can I switch off the decoder?
Use B to select 'OFF' (Decoder switched off).
8To end, press DISPLAY/STATUS/EXIT.
The decoder has now been allocated to this TV channel.
10